Scene Memory | Number of Scenes | 1000 | |
Recall Safe | Yes | ||
Focus Recall | Yes | ||
Fade Time | Yes (0s ~ 60s) | ||
Preview | Yes (V2.0 or later) | ||
Selective Load / Save | Yes (V1.5 or later) | ||
Global Paste | Yes (V1.2 or later) | ||
Event List | Yes (V2.0 or later with timecode trigger) | ||
Overlay | Yes (V1.2 or later) | ||
Isolate | Yes | ||
Tactile Control Keys | Yes | ||
Input Channel Functions | Gain Compensation | Yes | |
Silk | Yes (with RPio) | ||
Digital Gain | Yes (-96dB ~ +24dB) | ||
ATT | No | ||
HPF | 20Hz~2000Hz, -6/-12/-18/-24dB/oct Selectable | ||
PEQ | 4 Band Full PEQ (4 algorithms, RTA overlay support) | ||
Dynamics 1 | Legacy Comp / Comp260 / Gate / De-Esser / Expander / Ducking | ||
Dynamics 2 | Legacy Comp / Comp260 / Gate / De-Esser / Expander / Ducking | ||
Input Delay | Yes (0ms ~ 1000ms) | ||
Pan | Center Nominal | ||
DCA Group | 24 (Output DCA support) | ||
DCA Rollout | Yes | ||
MUTE Group | 12 | ||
Number of Inserts | 4 slots on each 2 insert point | ||
Direct Out | Yes | ||
Output Channel Functions | PEQ | 8 Band Full PEQ | |
GEQ | Plug-in | ||
Dynamics 1 | Legacy Comp / Comp260 / Gate / De-Esser / Expander / Ducking | ||
Output Channel Delay | Yes (0ms ~ 1000ms) | ||
MUTE Group | 12 | ||
Number of Inserts | 4 slots on each 2 insert point | ||
Plug-in | Number of Slots | 384 | |
Number of Effect Programs | 50 | ||
GEQ Rack | Number of GEQ Racks | 48 | |
Mountable Device | 31BandGEQ / Flex15GEQ / 8Band PEQ (RTA overlay support) | ||
TWINLANe | Number of I/O Channels | 256 in / 256 out (with HY256-TL) |
|
Dante | Number of I/O Channels | 144 in / 144 out (with HY144-D) |
|
Recording | USB Memory Recording | Yes | |
DVS Recording | Yes (with HY144-D) | ||
Broadcast Functions | 5.1 Surround Panning | Yes (V2.0 or later) | |
Surround Monitor | Yes (V2.0 or later) | ||
Mix Minus | Yes (V2.0 or later) | ||
L-Mono / R-Mono / LR-Mono | No | ||
Monitor | Solo Mode | Yes | |
Oscillator | Sine Wave 1ch / Sine Wave 2ch / Pink Noise / Burst Noise | ||
Other Functions | Port to Port | Yes (V1.5 or later) | |
Dual Console | Yes (V2.0 or later) | ||
DSP Mirroring | Yes (V2.0 or later) | ||
Timecode Reader/Display | Yes (V2.0 or later) | ||
Timecode Chase (Event List) | Yes (V2.0 or later) | ||
GPI/MIDI | Yes | ||
RTA | Yes | ||
Output Port Delay | Yes (0ms ~ 1000ms) | ||
Cascade | Yes (Future Update) | ||
User Interface | Display | 15 inch Touch Panel x 2 | |
Centralogic Section | Yes | ||
Faders | 12 + 12 + 12 + 2 | ||
Selected Channel Encoders | All Parameters | ||
Channel Encoder | Yes | ||
Channel Name / Color Display | Yes | ||
Custom Fader Banks | Yes (6 x 2 on each bay) | ||
User Defined Keys | 12 (x 4 banks) | ||
User Defined Knobs | 4 (x 4 banks) | ||
Touch and Turn Knob | Yes | ||
Monitor Level Knob | Yes (2: A and B) | ||
Wooden Arm Rest | Yes | ||
Software | Editor | RIVAGE PM Editor | |
StageMix | RIVAGE PM StageMix | ||
MonitorMix | TBD | ||
Nuendo Live: Control integration | Yes (Future Update) | ||
Console File Converter | Yes |
PM Series
Home / Professional Audio / Mixers
PM Series
RIVAGE PM10 (excluding I/O RACK) |
|||
Mixing Capacity | Input Mixing Channels | 144mono | |
Mix Buses | 72 | ||
Matrices | 36 (Input to Matrix supported) | ||
Stereo Buses | 2 | ||
Mono Buses | 1 | ||
Cue Bus | 2 | ||
Local Connectors | Analog Input | XLR | 8 |
Analog Output | XLR | 8 | |
Expansion Slots | HY Slots | 4 (DSP-R10) | |
MY Slots | CS-R10: 2 DSP-R10: 2 |
||
Digital In | AES/EBU | 4 | |
Digital Out | AES/EBU | 4 | |
GPI | IN (D-Sub) | 8 (CS-R10) / 8 (DSP-R10) | |
Out (D-Sub) | 8 (CS-R10) / 8 (DSP-R10) | ||
Word Clock I/O | Only Out (CS-R10) In / Out (DSP-R10) |
||
MIDI I/O | In / Out (CS-R10) In / Out (DSP-R10) |
||
USB | File | 4 | |
2 Track Rec/Play | 1 | ||
External Redundant PSU | Built-in dual power supply | ||
Meter Bridge | On screen | ||
Ethernet | Yes | ||
Lamp | 4 (CS-R10) / 3 (CS-R10-S) | ||
Talkback In | Yes | ||
Video Out | Yes | ||
TC In | Yes (DSP-R10) | ||
Fault Output | Yes (DSP-R10) | ||
Phones | 2 | ||
AC Inlet | CS-R10: 2 (V-Lock Type) DSP-R10: 2 (V-Lock Type) |
SKU: 11004
Categories: Mixers, Professional Audio
Weight | 21.3 kg |
---|
Be the first to review “PM Series” Cancel reply
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products
MG166CX | MG166C | ||
Specifications | |||
Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT) | Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT) | |
Frequency Response | 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT) | Response 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT) | |
Hum & Noise | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum | |
Input Connectors | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 | |
Output Connectors | ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 | ST: 2, AUX SEND: 3, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 | |
Crosstalk | -70 dB @ 1 kHz | -70 dB @ 1 kHz |
CL5 | CL3 | CL1 | QL5 | QL1 | ||
Mixing Capacity | Input Mixing Channels | 72 mono + 8 stereo | 64 mono + 8 stereo | 48 mono + 8 stereo | 64 mono + 8 stereo | 32 mono + 8 stereo |
Mix Buses | 24 | 16 | ||||
Matrices | 8 (Input to Matrix supported) | 8 (Input to Matrix supported) | ||||
Stereo Bus | 1 | 1 | ||||
Mono | 1 | 1 | ||||
Cue | 1 (Second Cue Bus supported in CL V4.0 or later) | 1 (Second Cue Bus supported in QL V4.0 or later) | ||||
Local Connectors | Analog Inputs | 8 | 32 | 16 | ||
Analog Outputs | 8 | 16 | 8 | |||
MY Slots | 3 | 2 | ||||
Dante I/O | Primary / Secondary | Primary / Secondary | ||||
Digital Out | 1 (AES/EBU) | 1 (AES/EBU) | ||||
GPI | 5 in / 5 out (CL V1.11 or later) | 5 in / 5 out | ||||
Word Clock I/O | Yes | Yes | ||||
MIDI I/O | In / Out | In / Out | ||||
External Redundant PSU | Optional PW800W | No | ||||
Meter Bridge | Output meter built-in | Optional MBCL | No | |||
Ethernet | Yes | Yes | ||||
AC Inlet | V-Lock Type | V-Lock Type | ||||
Scene Memory | Number of Scenes | 300 | 300 | |||
Recall Safe | Yes | Yes | ||||
Focus Recall | Yes | Yes | ||||
Fade Time | Yes (0s ~ 60s) | Yes (0s ~ 60s) | ||||
Preview | Yes (CL V1.51 or later) | Yes | ||||
Selective Load / Save | Yes (CL V1.7 or later) | Yes | ||||
Tactile Control Keys | Yes | No (on-screen) | ||||
Input Channel Functions | Gain Compensation | Yes | Yes | |||
Digital Gain | Yes (-96dB ~ +24dB) | Yes (-96dB ~ +24dB) | ||||
ATT | -96dB ~ 0dB | -96dB ~ 0dB | ||||
HPF | 20Hz ~ 600Hz, -6 or -12dB/oct Selectable (CL V1.51 or later) | 20Hz ~ 600Hz, -6 or -12dB/oct Selectable |
General specifications | |||
Speaker type | |||
Frequency range (-10dB) | |||
Nominal coverage | |||
Components | |||
Crossover | |||
Output power | |||
Maximum output level (1m; on axis) | |||
I/O connectors | |||
Processors |
₦260,000.00
General Specifications | |
Audio channels | 16IN / 16OUT |
Sample rates | 44.1kHz, 48kHz, 88.2kHz and 96kHz |
Sample rate pull-up/down | +4.1667, +0.1, -0.1, and – 4.0 % |
Sample bit-depth | 16, 24 or 32-bit PCM |
Network | 2 x Gigabit (1000Mbps) Ethernet RJ45 connectors |
Redundancy | Glitch-free Dante audio redundancy using dual Ethernet networks (redundant mode) |
Daisy chaining | Daisy chain multiple Dante-MY16-AUD2 cards together (switched mode) |
HA Remote | Support for HA Remote capable Yamaha products |
Expandable | Install up to four Dante-MY16-AUD2 cards in available MY16-compatible slots for up to 64×64 audio channels |
Compatible Yamaha equipments | |
Digital Mixers | CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i |
Interfaces | RSio64-D |
Processors | MRX7-D, MTX5-D, DME24N, DME64N |
Power Amps | TX4n, TX5n, TX6n |
₦260,000.00
MG166CX-USB | MG166C-USB | ||
Specifications | |||
Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT) | Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT) | |
Frequency Response | 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT) | Response 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT) | |
Hum & Noise | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum | |
Input Connectors | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 | |
Output Connectors | ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 | ST: 2, AUX SEND: 3, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 | |
Crosstalk | -70 dB @ 1 kHz | -70 dB @ 1 kHz |
₦372,075.00 – ₦533,307.00
DBR12 | ||
General specifications | ||
Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |
Frequency range (-10dB) | 52Hz – 20kHz | |
Nominal coverage | 90°
60° |
|
Components |
LF |
Diameter:12″ cone, Voice Coil:2″, Magnet:Ferrite |
HF |
Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite | |
Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |
Output power | Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) | |
Maximum output level (1m; on axis) | 131dB SPL | |
I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |
Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
Heat dissipation | Fan cooling, 4 speeds | |
Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |
Power consumption | 74W(1/8 Power Consumption), 18W(Idle) | |
Cabinet material | Plastic | |
Finish | Black | |
Handle | Side x 2 | |
Flying and mounting hardware | Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) | |
Pole socket | 35mm (Bottom x 1) | |
Dimensions |
W | 376mm (14.8″) |
H | 601mm (23.7″) | |
D | 348mm (13.7″) | |
Net weight | 15.8 kg (34.8 lbs) |
₦425,600.00 – ₦492,800.00
MGP32X | MGP24X | MGP16X | MGP12X | |||||
Outline | ||||||||
Mixing capability | Mixing channels | 32 Line Inputs (24 mono and 4 stereo) | 24 Line Inputs (16 mono and 4 stereo) | 16 Line Inputs (8 mono and 4 stereo) | 12 Line Inputs (4 mono and 4 stereo) | |||
GROUP | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | ||||
AUX | 6 AUX Sends + 2 FX Sends | 6 AUX Sends + 2 FX Sends | 2 AUX Sends + 2 FX Sends | 2 AUX Sends + 2 FX Sends | ||||
MATRIX | 1 Matrix out | 1 Matrix out | – | – | ||||
On-board processors | FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) | ||||
Input channel functions | – | – | Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving | Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving |
₦784,000.00 – ₦1,232,000.00
TF5 | ||
Outline | ||
Fader Configuration | 32 + 1 (Master) | 24 + 1 (Master) |
Mixing Capacity | Input Channels
|
48 (40 mono + 2 stereo + 2 return) |
Aux Buses
|
20 (8 mono + 6 stereo) | |
Stereo Buses
|
1 | |
Sub Buses | 1 | |
Input channel functions | 8 DCA Groups | 8 DCA Groups |
I/O | Inputs
|
32 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
Outputs
|
16 (XLR) | |
Expansion slots | 1 | |
On-board processors | DSP | 8 Effects + 10 GEQ |
USB | 34×34 USB Audio Interface, 2-track recording via USB Storage Device | 34×34 USB Audio Interface, 2-track recording via USB Storage Device |
General specifications | ||
Sampling frequency rate | Internal | 48 kHz |
Signal delay | Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz | Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
Fader | 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders | 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
Total harmonic distortion | Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) | Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
Frequency response | +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT | +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
Dynamic range | 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. | 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
Hum & noise level | Equivalent input noise
|
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
Residual output noise | –85 dBu, ST master off (Measured with an A-Weight filter) | |
Crosstalk | –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. | –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
Power requirements | 100–240 V 50/60 Hz | 100–240 V 50/60 Hz |
Power consumption | 120 W | 110 W |
Dimensions | W | 866 mm (34.1in) |
H | 225 mm (8.9in) | |
D | 599 mm (23.6in) | |
Net weight | 20.0 kg (44.1lb) | 17.0 kg (37.5lb) |
Accessories | Quick Guide, Power Cord, CUBASE AI download information | Quick Guide, Power Cord, CUBASE AI download information |
Options | Expansion Card, Foot Switch (FC5) | Expansion Card, Foot Switch (FC5) |
Others | Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C | Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
₦784,000.00 – ₦1,232,000.00
TF3 | ||
Outline | ||
Fader Configuration | 32 + 1 (Master) | 16 + 1 (Master) |
Mixing Capacity | Input Channels
|
48 (40 mono + 2 stereo + 2 return) |
Aux Buses
|
20 (8 mono + 6 stereo) | |
Stereo Buses
|
1 | |
Sub Buses | 1 | |
Input channel functions | 8 DCA Groups | 8 DCA Groups |
I/O | Inputs
|
24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
Outputs
|
16 (XLR) | |
Expansion slots | 1 | |
On-board processors | DSP | 8 Effects + 10 GEQ |
USB | 34×34 USB Audio Interface, 2-track recording via USB Storage Device | 34×34 USB Audio Interface, 2-track recording via USB Storage Device |
General specifications | ||
Sampling frequency rate | Internal | 48 kHz |
Signal delay | Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz | Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
Fader | 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders | 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
Total harmonic distortion | Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) | Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
Frequency response | +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT | +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
Dynamic range | 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. | 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
Hum & noise level | Equivalent input noise
|
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
Residual output noise | –85 dBu, ST master off (Measured with an A-Weight filter) | |
Crosstalk | –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. | –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
Power requirements | 100–240 V 50/60 Hz | 100–240 V 50/60 Hz |
Power consumption | 120 W | 110 W |
Dimensions | W | 716 mm (28.2in) |
H | 225 mm (8.9in) | |
D | 599 mm (23.6in) | |
Net weight | 20.0 kg (44.1lb) | 13.5 kg (29.8lb) |
Accessories | Quick Guide, Power Cord, CUBASE AI download information | Quick Guide, Power Cord, CUBASE AI download information |
Options | Expansion Card, Foot Switch (FC5) | Rack-mount Kit RK5014, Expansion Card, Foot Switch (FC5) |
Others | Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C | Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
Reviews