-
Reviews (0)
- |
-
Add Tags
- |
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products
₦260,000.00
| General Specifications | |
| Audio channels | 16IN / 16OUT |
| Sample rates | 44.1kHz, 48kHz, 88.2kHz and 96kHz |
| Sample rate pull-up/down | +4.1667, +0.1, -0.1, and – 4.0 % |
| Sample bit-depth | 16, 24 or 32-bit PCM |
| Network | 2 x Gigabit (1000Mbps) Ethernet RJ45 connectors |
| Redundancy | Glitch-free Dante audio redundancy using dual Ethernet networks (redundant mode) |
| Daisy chaining | Daisy chain multiple Dante-MY16-AUD2 cards together (switched mode) |
| HA Remote | Support for HA Remote capable Yamaha products |
| Expandable | Install up to four Dante-MY16-AUD2 cards in available MY16-compatible slots for up to 64×64 audio channels |
| Compatible Yamaha equipments | |
| Digital Mixers | CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i |
| Interfaces | RSio64-D |
| Processors | MRX7-D, MTX5-D, DME24N, DME64N |
| Power Amps | TX4n, TX5n, TX6n |
₦967,395.00 – ₦1,302,262.00
| DSR215 | ||
| General specifications | ||
| Speaker type | Dual 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | |
| Frequency range
(-10dB) |
45Hz ~ 20kHz | |
| Frequency response
(-3dB) |
55Hz ~ 18kHz | |
| Nominal coverage | H | 90° |
| V | 60° | |
| Components | LF | 2 x 15″ cone |
|
HF |
2″ Titanium diaphragm compression driver | |
| Crossover | FIR-X tuning (linear phase FIR filter) | |
| Output power | 1500W (LF: 1020W, HF: 480W) | |
| Maximum output level (1m; on axis) | 138dB SPL | |
| I/O connectors | INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | |
| Processors | D-CONTOUR (Dynamic CONTOUR) | |
| Power consumption | 100W | |
| Dimensions | W | 520mm (20 4/8″) |
| H | 638mm (25 2/8″) | |
| D | 584mm (23″) | |
| Net weight | 49.8kg (110lbs) | |
| Flying and mounting hardware | – | |
| Pole socket | – | |
| DSR215 | DSR115 | DSR112 | DSR118W | ||||||
| General specifications | |||||||||
| Speaker type | Dual 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | 12″ 2-way, Bi-amp Powered Speaker, Bass-reflex Type | 18″ Powered Subwoofer, Bass-reflex Type | |||||
| Frequency range (-10dB) | 45Hz ~ 20kHz | 45Hz ~ 20kHz | 55Hz ~ 20kHz | 40Hz ~ 130Hz | |||||
| Frequency response (-3dB) | 55Hz ~ 18kHz | 55Hz ~ 18kHz | 60Hz ~ 18kHz | 50Hz ~ 110Hz | |||||
| H | 90° | 90° | 90° | ||||||
| V | 60° | 60° | 60° | ||||||
| LF | 2 x 15″ cone | 15″ cone | 12″ cone | 18″ cone | |||||
| HF | 2″ Titanium diaphragm compression driver | 2″ Titanium diaphragm compression driver | 2″ Titanium diaphragm compression driver | ||||||
| FIR-X tuning (linear phase FIR filter) | FIR-X tuning (linear phase FIR filter) | FIR-X tuning (linear phase FIR filter) 1.7kHz | – | ||||||
| 1500W (LF: 1020W, HF: 480W) | 1500W (LF: 1020W, HF: 480W) | 1500W (LF: 1020W, HF: 480W) | 1020W | ||||||
| 138dB SPL | 136dB SPL | 134dB SPL | 132dB SPL | ||||||
| INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | INPUT:XLR-3-31 x1 (Balanced) TRS Phone Jack x1 (Balanced), OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | INPUT: XLR-3-31 x2 (Balanced) OUTPUT: XLR-3-32 x2 (Balanced) Parallel connection with INPUT | ||||||
| CL5 | CL3 | CL1 | QL5 | QL1 | ||
| Mixing Capacity | Input Mixing Channels | 72 mono + 8 stereo | 64 mono + 8 stereo | 48 mono + 8 stereo | 64 mono + 8 stereo | 32 mono + 8 stereo |
| Mix Buses | 24 | 16 | ||||
| Matrices | 8 (Input to Matrix supported) | 8 (Input to Matrix supported) | ||||
| Stereo Bus | 1 | 1 | ||||
| Mono | 1 | 1 | ||||
| Cue | 1 (Second Cue Bus supported in CL V4.0 or later) | 1 (Second Cue Bus supported in QL V4.0 or later) | ||||
| Local Connectors | Analog Inputs | 8 | 32 | 16 | ||
| Analog Outputs | 8 | 16 | 8 | |||
| MY Slots | 3 | 2 | ||||
| Dante I/O | Primary / Secondary | Primary / Secondary | ||||
| Digital Out | 1 (AES/EBU) | 1 (AES/EBU) | ||||
| GPI | 5 in / 5 out (CL V1.11 or later) | 5 in / 5 out | ||||
| Word Clock I/O | Yes | Yes | ||||
| MIDI I/O | In / Out | In / Out | ||||
| External Redundant PSU | Optional PW800W | No | ||||
| Meter Bridge | Output meter built-in | Optional MBCL | No | |||
| Ethernet | Yes | Yes | ||||
| AC Inlet | V-Lock Type | V-Lock Type | ||||
| Scene Memory | Number of Scenes | 300 | 300 | |||
| Recall Safe | Yes | Yes | ||||
| Focus Recall | Yes | Yes | ||||
| Fade Time | Yes (0s ~ 60s) | Yes (0s ~ 60s) | ||||
| Preview | Yes (CL V1.51 or later) | Yes | ||||
| Selective Load / Save | Yes (CL V1.7 or later) | Yes | ||||
| Tactile Control Keys | Yes | No (on-screen) | ||||
| Input Channel Functions | Gain Compensation | Yes | Yes | |||
| Digital Gain | Yes (-96dB ~ +24dB) | Yes (-96dB ~ +24dB) | ||||
| ATT | -96dB ~ 0dB | -96dB ~ 0dB | ||||
| HPF | 20Hz ~ 600Hz, -6 or -12dB/oct Selectable (CL V1.51 or later) | 20Hz ~ 600Hz, -6 or -12dB/oct Selectable |
| QL5 | QL1 | ||
| Mixing Capacity | Input Mixing Channels | 64 mono + 8 stereo | 32 mono + 8 stereo |
| Mix Buses | 16 | ||
| Matrices | 8 (Input to Matrix supported) | ||
| Stereo Bus | 1 | ||
| Mono | 1 | ||
| Cue | 1 (Second Cue Bus supported in QL V4.0 or later) | ||
| Local Connectors | Analog Inputs | 32 | 16 |
| Analog Outputs | 16 | 8 | |
| MY Slots | 2 | ||
| Dante I/O | Primary / Secondary | ||
| Digital Out | 1 (AES/EBU) | ||
| GPI | 5 in / 5 out | ||
| Word Clock I/O | Yes | ||
| MIDI I/O | In / Out | ||
| External Redundant PSU | No | ||
| Meter Bridge | Optional MBCL | No | |
| Ethernet | Yes | ||
| AC Inlet | V-Lock Type |
₦425,600.00 – ₦492,800.00
| MGP32X | MGP24X | MGP16X | MGP12X | |||||
| Outline | ||||||||
| Mixing capability | Mixing channels | 32 Line Inputs (24 mono and 4 stereo) | 24 Line Inputs (16 mono and 4 stereo) | 16 Line Inputs (8 mono and 4 stereo) | 12 Line Inputs (4 mono and 4 stereo) | |||
| GROUP | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | ||||
| AUX | 6 AUX Sends + 2 FX Sends | 6 AUX Sends + 2 FX Sends | 2 AUX Sends + 2 FX Sends | 2 AUX Sends + 2 FX Sends | ||||
| MATRIX | 1 Matrix out | 1 Matrix out | – | – | ||||
| On-board processors | FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) | ||||
| Input channel functions | – | – | Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving | Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving | ||||
₦967,395.00 – ₦1,302,262.00
| DSR115 | ||
| General specifications | ||
| Speaker type | 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | |
| Frequency range
(-10dB) |
45Hz ~ 20kHz | |
| Frequency response
(-3dB) |
55Hz ~ 18kHz | |
| Nominal coverage | H | 90° |
| V | 60° | |
| Components | LF | 15″ cone |
|
HF |
2″ Titanium diaphragm compression driver | |
| Crossover | FIR-X tuning (linear phase FIR filter) | |
| Output power | 1500W (LF: 1020W, HF: 480W) | |
| Maximum output level (1m; on axis) | 136dB SPL | |
| I/O connectors | INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | |
| Processors | D-CONTOUR (Dynamic CONTOUR) | |
| Power consumption | 100W | |
| Dimensions | W | 467mm (18 3/8″) |
| H | 1158mm (45 5/8″) | |
| D | 520mm (20 4/8″) | |
| Net weight | 28.0kg (62lbs) | |
| Flying and mounting hardware | 3 x M10 (TOP L/R 1pc each, Bottom rear 1pc) | |
| Pole socket | 35mm (Bottom Board) | |
₦180,400.00 – ₦225,500.00
| HS8 | ||
| General specifications | ||
| Speaker type | 2-way bi-amp powered studio monitor | |
| Frequency range (-10bB) | 38Hz – 30Hz | |
| Component | LF | 8” cone |
| HF | 1” dome | |
| Crossover | 2kHz | |
| Output power | 120W (LF:75W, HF:45W) | |
| I/O connectors | XLR3-31 type (balanced),
PHONE (balanced) |
|
| Power consumption | 60W | |
| Shape | Base-reflex type | |
| Cabinet material | MDF | |
| Dimensions | W | 250mm (9.8”) |
| H | 390mm (15.4”) | |
| D | 334mm (13.1”) | |
| Net weight | 10.2kg (22.5 lbs.) | |
| Others | LEVEL control (+4Db/center click),
EQ: HIGH TRIM switch (+/- 2Db at HF) / ROOM CONTROL Switch (o/-2/-4 Db UNDER 500Hz) |
| MG166CX | MG166C | ||
| Specifications | |||
| Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT) | Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT) | |
| Frequency Response | 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT) | Response 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT) | |
| Hum & Noise | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum | |
| Input Connectors | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 | |
| Output Connectors | ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 | ST: 2, AUX SEND: 3, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 | |
| Crosstalk | -70 dB @ 1 kHz | -70 dB @ 1 kHz | |
| CL5 | CL3 | CL1 | QL5 | QL1 | ||
| Mixing Capacity | Input Mixing Channels | 72 mono + 8 stereo | 64 mono + 8 stereo | 48 mono + 8 stereo | 64 mono + 8 stereo | 32 mono + 8 stereo |
| Mix Buses | 24 | 16 | ||||
| Matrices | 8 (Input to Matrix supported) | 8 (Input to Matrix supported) | ||||
| Stereo Bus | 1 | 1 | ||||
| Mono | 1 | 1 | ||||
| Cue | 1 (Second Cue Bus supported in CL V4.0 or later) | 1 (Second Cue Bus supported in QL V4.0 or later) | ||||
| Local Connectors | Analog Inputs | 8 | 32 | 16 | ||
| Analog Outputs | 8 | 16 | 8 | |||
| MY Slots | 3 | 2 | ||||
| Dante I/O | Primary / Secondary | Primary / Secondary | ||||
| Digital Out | 1 (AES/EBU) | 1 (AES/EBU) | ||||
| GPI | 5 in / 5 out (CL V1.11 or later) | 5 in / 5 out | ||||
| Word Clock I/O | Yes | Yes | ||||
| MIDI I/O | In / Out | In / Out | ||||
| External Redundant PSU | Optional PW800W | No | ||||
| Meter Bridge | Output meter built-in | Optional MBCL | No | |||
| Ethernet | Yes | Yes | ||||
| AC Inlet | V-Lock Type | V-Lock Type |
Reviews