-
Reviews (0)
- |
-
Add Tags
- |
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products
₦372,075.00 – ₦533,307.00
| DBR12 | ||
| General specifications | ||
| Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |
| Frequency range (-10dB) | 52Hz – 20kHz | |
| Nominal coverage | 90°
60° |
|
| Components |
LF |
Diameter:12″ cone, Voice Coil:2″, Magnet:Ferrite |
|
HF |
Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite | |
| Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |
| Output power | Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) | |
| Maximum output level (1m; on axis) | 131dB SPL | |
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
| Heat dissipation | Fan cooling, 4 speeds | |
| Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |
| Power consumption | 74W(1/8 Power Consumption), 18W(Idle) | |
| Cabinet material | Plastic | |
| Finish | Black | |
| Handle | Side x 2 | |
| Flying and mounting hardware | Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) | |
| Pole socket | 35mm (Bottom x 1) | |
|
Dimensions |
W | 376mm (14.8″) |
| H | 601mm (23.7″) | |
| D | 348mm (13.7″) | |
| Net weight | 15.8 kg (34.8 lbs) | |
| CBR15 | CBR12 | CBR10 | ||
| General specifications | General specifications | General specifications | ||
| Speaker type | 2-way Speaker, Bass-reflex Type | 2-way Speaker, Bass-reflex Type | 2-way Speaker, Bass-reflex Type | |
| Frequency range (-10dB) | 46 Hz – 20 kHz | 48 Hz – 20 kHz | 50 Hz – 20 kHz | |
| Nominal coverage | H | 90° | 90° | 90° |
| V | 60° | 60° | 60° | |
| Components | LF | 15″ Cone, 2.5″ Voice Coil (Ferrite Magnet) | 12″ Cone, 2″ Voice Coil (Ferrite Magnet) | 10″ Cone, 2″ Voice Coil (Ferrite Magnet) |
| HF | 1.4″ Voice Coil, Compression Driver (Ferrite Magnet) | 1.4″ Voice Coil, Compression Driver (Ferrite Magnet) | 1″ Voice Coil, Compression Driver (Ferrite Magnet) | |
| Crossover | 2.0 kHz | 2.1 kHz | 2.8 kHz | |
| Power rating | NOISE | 250W | 175W | 175W |
| PGM | 500W | 350W | 350W | |
| PEAK | 1000W | 700W | 700W |
| RIVAGE PM10 (excluding I/O RACK) |
|||
| Mixing Capacity | Input Mixing Channels | 144mono | |
| Mix Buses | 72 | ||
| Matrices | 36 (Input to Matrix supported) | ||
| Stereo Buses | 2 | ||
| Mono Buses | 1 | ||
| Cue Bus | 2 | ||
| Local Connectors | Analog Input | XLR | 8 |
| Analog Output | XLR | 8 | |
| Expansion Slots | HY Slots | 4 (DSP-R10) | |
| MY Slots | CS-R10: 2 DSP-R10: 2 |
||
| Digital In | AES/EBU | 4 | |
| Digital Out | AES/EBU | 4 | |
| GPI | IN (D-Sub) | 8 (CS-R10) / 8 (DSP-R10) | |
| Out (D-Sub) | 8 (CS-R10) / 8 (DSP-R10) | ||
| Word Clock I/O | Only Out (CS-R10) In / Out (DSP-R10) |
||
| MIDI I/O | In / Out (CS-R10) In / Out (DSP-R10) |
||
| USB | File | 4 | |
| 2 Track Rec/Play | 1 | ||
| External Redundant PSU | Built-in dual power supply | ||
| Meter Bridge | On screen | ||
| Ethernet | Yes | ||
| Lamp | 4 (CS-R10) / 3 (CS-R10-S) | ||
| Talkback In | Yes | ||
| Video Out | Yes | ||
| TC In | Yes (DSP-R10) | ||
| Fault Output | Yes (DSP-R10) | ||
| Phones | 2 | ||
| AC Inlet | CS-R10: 2 (V-Lock Type) DSP-R10: 2 (V-Lock Type) |
₦685,440.00
| C215V | ||
| Size/Weight | ||
| Dimensions | Width | 491mm |
| Height | 1163mm | |
| Depth | 593mm | |
| Weight | Weight | 47.5kg |
| Specifications | ||
| Enclosure | Bass Reflex Type | |
| Speaker unit (LF) | 15″ cone x 2 | |
| Speaker unit (HF) | 2″ V.C.driver | |
| Frequency Response | 42Hz-16kHz | |
| Power Capacity (Noise) | 500W | |
| Power Capacity (Program) | 1000W | |
| Power Capacity (Maximum) | 2000W | |
| Nominal Impedance | 4 ohms | |
| Sensitivity | 99db SPL (1W, 1m) | |
| Nominal Dispersion (Horizontal) | 90° | |
| Nominal Dispersion (Vertical) | 40° | |
| Crossover Frequency | 1.5kHz | |
| Input Connectors | 1/4 ” Phone Jack x 2, Neutrik Speakon NL4MP x 2 | |
| Speaker Units | – | |
| Recommended Crossover | – | |
₦1,075,200.00
| 01V962 | ||
| Outline | ||
| Mixing capability | Mixing channels | 32 Mono + 4 Stereo |
| GROUP | 8 | |
| AUX | 8 | |
| MAIN | Stereo | |
| Input channel functions | Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan | |
| Output channel functions | Attenuator, 4-band PEQ, Compressor, Delay | |
| On-board processors | 4x SPX multi effectors | |
| I/O | Mic inputs | 12 |
| Phantom power | +48V DC; ON/OFF per 4ch | |
| Line inputs | 2x Stereo, 2x 2tr in | |
| AD converter | 24-bit; 128-time over sampling | |
| Line outputs | Stereo output, Monitor output, 4x Omni output | |
| DA converter | 24-bit; 128-time over sampling | |
| Digital I/O | ADAT (8-in/8-out), 2tr in/out | |
| Expansion slots | Mini-YGDAI (16-in/16-out) | |
₦180,400.00 – ₦225,500.00
| HS5 | ||
| General specifications | ||
| Speaker type | 2-way bi-amp powered studio monitor | |
| Frequency range (-10bB) | 54Hz – 30Hz | |
| Component | LF | 5” cone |
| HF | 1” dome | |
| Crossover | 2kHz | |
| Output power | 70W (LF:45W, HF:25W) | |
| I/O connectors | XLR3-31 type (balanced), PHONE (balanced) | |
| Power consumption | 45W | |
| Shape | Base-reflex type | |
| Cabinet material | MDF | |
| Dimensions | W | 170mm (6.7”) |
| H | 285mm (11.2”) | |
| D | 222mm (8.7”) | |
| Net weight | 5.3kg (11.7 lbs.) | |
| Others | LEVEL control (+4Db/center click),
EQ: HIGH TRIM switch (+/- 2Db at HF) / ROOM CONTROL Switch (o/-2/-4 Db UNDER 500Hz) |
| QL5 | QL1 | ||
| Mixing Capacity | Input Mixing Channels | 64 mono + 8 stereo | 32 mono + 8 stereo |
| Mix Buses | 16 | ||
| Matrices | 8 (Input to Matrix supported) | ||
| Stereo Bus | 1 | ||
| Mono | 1 | ||
| Cue | 1 (Second Cue Bus supported in QL V4.0 or later) | ||
| Local Connectors | Analog Inputs | 32 | 16 |
| Analog Outputs | 16 | 8 | |
| MY Slots | 2 | ||
| Dante I/O | Primary / Secondary | ||
| Digital Out | 1 (AES/EBU) | ||
| GPI | 5 in / 5 out | ||
| Word Clock I/O | Yes | ||
| MIDI I/O | In / Out | ||
| External Redundant PSU | No | ||
| Meter Bridge | Optional MBCL | No | |
| Ethernet | Yes | ||
| AC Inlet | V-Lock Type |
| HS8 | HS5 | ||
| General specifications | |||
| Speaker type | 2-way bi-amp powered studio monitor | 2-way bi-amp powered studio monitor | |
| Frequency range (-10dB) | 38Hz – 30kHz | 54Hz – 30kHz | |
| Components | LF | 8″ cone | 5″ cone |
| HF | 1″ dome | 1″ dome | |
| Crossover | 2kHz | 2kHz | |
| Output power | 120W (LF:75W, HF:45W) | 70W (LF:45W, HF:25W) | |
| I/O connectors | XLR3-31 type (balanced), PHONE (balanced) | XLR3-31 type (balanced), PHONE (balanced) | |
| Power consumption | 60W | 45W | |
| Shape | Bass-reflex type | Bass-reflex type | |
| Cabinet material | MDF | MDF | |
| Dimensions | W | 250mm (9.8″) | 170mm (6.7″) |
| H | 390mm (15.4″) | 285mm (11.2″) | |
| D | 334mm (13.1″) | 222mm (8.7″) | |
| Net weight | 10.2kg (22.5 lbs.) | 5.3kg (11.7 lbs.) | |
| Others | LEVEL control (+4dB/center click) , EQ: HIGH TRIM switch (+/- 2dB at HF) / ROOM CONTROL switch (0/-2/-4 dB under 500Hz) | LEVEL control (+4dB/center click) , EQ: HIGH TRIM switch (+/- 2dB at HF) / ROOM CONTROL switch (0/-2/-4 dB under 500Hz) | |
| DSR215 | DSR115 | DSR112 | DSR118W | ||||||
| General specifications | |||||||||
| Speaker type | Dual 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | 12″ 2-way, Bi-amp Powered Speaker, Bass-reflex Type | 18″ Powered Subwoofer, Bass-reflex Type | |||||
| Frequency range (-10dB) | 45Hz ~ 20kHz | 45Hz ~ 20kHz | 55Hz ~ 20kHz | 40Hz ~ 130Hz | |||||
| Frequency response (-3dB) | 55Hz ~ 18kHz | 55Hz ~ 18kHz | 60Hz ~ 18kHz | 50Hz ~ 110Hz | |||||
| H | 90° | 90° | 90° | ||||||
| V | 60° | 60° | 60° | ||||||
| LF | 2 x 15″ cone | 15″ cone | 12″ cone | 18″ cone | |||||
| HF | 2″ Titanium diaphragm compression driver | 2″ Titanium diaphragm compression driver | 2″ Titanium diaphragm compression driver | ||||||
| FIR-X tuning (linear phase FIR filter) | FIR-X tuning (linear phase FIR filter) | FIR-X tuning (linear phase FIR filter) 1.7kHz | – | ||||||
| 1500W (LF: 1020W, HF: 480W) | 1500W (LF: 1020W, HF: 480W) | 1500W (LF: 1020W, HF: 480W) | 1020W | ||||||
| 138dB SPL | 136dB SPL | 134dB SPL | 132dB SPL | ||||||
| INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | INPUT:XLR-3-31 x1 (Balanced) TRS Phone Jack x1 (Balanced), OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | INPUT: XLR-3-31 x2 (Balanced) OUTPUT: XLR-3-32 x2 (Balanced) Parallel connection with INPUT | ||||||
₦784,000.00 – ₦1,232,000.00
| TF3 | ||
| Outline | ||
| Fader Configuration | 32 + 1 (Master) | 16 + 1 (Master) |
| Mixing Capacity | Input Channels
|
48 (40 mono + 2 stereo + 2 return) |
| Aux Buses
|
20 (8 mono + 6 stereo) | |
| Stereo Buses
|
1 | |
| Sub Buses | 1 | |
| Input channel functions | 8 DCA Groups | 8 DCA Groups |
| I/O | Inputs
|
24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
| Outputs
|
16 (XLR) | |
| Expansion slots | 1 | |
| On-board processors | DSP | 8 Effects + 10 GEQ |
| USB | 34×34 USB Audio Interface, 2-track recording via USB Storage Device | 34×34 USB Audio Interface, 2-track recording via USB Storage Device |
| General specifications | ||
| Sampling frequency rate | Internal | 48 kHz |
| Signal delay | Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz | Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
| Fader | 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders | 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
| Total harmonic distortion | Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) | Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
| Frequency response | +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT | +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
| Dynamic range | 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. | 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
| Hum & noise level | Equivalent input noise
|
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
| Residual output noise | –85 dBu, ST master off (Measured with an A-Weight filter) | |
| Crosstalk | –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. | –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
| Power requirements | 100–240 V 50/60 Hz | 100–240 V 50/60 Hz |
| Power consumption | 120 W | 110 W |
| Dimensions | W | 716 mm (28.2in) |
| H | 225 mm (8.9in) | |
| D | 599 mm (23.6in) | |
| Net weight | 20.0 kg (44.1lb) | 13.5 kg (29.8lb) |
| Accessories | Quick Guide, Power Cord, CUBASE AI download information | Quick Guide, Power Cord, CUBASE AI download information |
| Options | Expansion Card, Foot Switch (FC5) | Rack-mount Kit RK5014, Expansion Card, Foot Switch (FC5) |
| Others | Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C | Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
Reviews