Interfaces
Home / Professional Audio
Interfaces
₦260,000.00
General Specifications | |
Audio channels | 16IN / 16OUT |
Sample rates | 44.1kHz, 48kHz, 88.2kHz and 96kHz |
Sample rate pull-up/down | +4.1667, +0.1, -0.1, and – 4.0 % |
Sample bit-depth | 16, 24 or 32-bit PCM |
Network | 2 x Gigabit (1000Mbps) Ethernet RJ45 connectors |
Redundancy | Glitch-free Dante audio redundancy using dual Ethernet networks (redundant mode) |
Daisy chaining | Daisy chain multiple Dante-MY16-AUD2 cards together (switched mode) |
HA Remote | Support for HA Remote capable Yamaha products |
Expandable | Install up to four Dante-MY16-AUD2 cards in available MY16-compatible slots for up to 64×64 audio channels |
Compatible Yamaha equipments | |
Digital Mixers | CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i |
Interfaces | RSio64-D |
Processors | MRX7-D, MTX5-D, DME24N, DME64N |
Power Amps | TX4n, TX5n, TX6n |
Category: Professional Audio
-
Reviews (0)
- |
-
Add Tags
- |
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products
CL5 | CL3 | CL1 | QL5 | QL1 | ||
Mixing Capacity | Input Mixing Channels | 72 mono + 8 stereo | 64 mono + 8 stereo | 48 mono + 8 stereo | 64 mono + 8 stereo | 32 mono + 8 stereo |
Mix Buses | 24 | 16 | ||||
Matrices | 8 (Input to Matrix supported) | 8 (Input to Matrix supported) | ||||
Stereo Bus | 1 | 1 | ||||
Mono | 1 | 1 | ||||
Cue | 1 (Second Cue Bus supported in CL V4.0 or later) | 1 (Second Cue Bus supported in QL V4.0 or later) | ||||
Local Connectors | Analog Inputs | 8 | 32 | 16 | ||
Analog Outputs | 8 | 16 | 8 | |||
MY Slots | 3 | 2 | ||||
Dante I/O | Primary / Secondary | Primary / Secondary | ||||
Digital Out | 1 (AES/EBU) | 1 (AES/EBU) | ||||
GPI | 5 in / 5 out (CL V1.11 or later) | 5 in / 5 out | ||||
Word Clock I/O | Yes | Yes | ||||
MIDI I/O | In / Out | In / Out | ||||
External Redundant PSU | Optional PW800W | No | ||||
Meter Bridge | Output meter built-in | Optional MBCL | No | |||
Ethernet | Yes | Yes | ||||
AC Inlet | V-Lock Type | V-Lock Type | ||||
Scene Memory | Number of Scenes | 300 | 300 | |||
Recall Safe | Yes | Yes | ||||
Focus Recall | Yes | Yes | ||||
Fade Time | Yes (0s ~ 60s) | Yes (0s ~ 60s) | ||||
Preview | Yes (CL V1.51 or later) | Yes | ||||
Selective Load / Save | Yes (CL V1.7 or later) | Yes | ||||
Tactile Control Keys | Yes | No (on-screen) | ||||
Input Channel Functions | Gain Compensation | Yes | Yes | |||
Digital Gain | Yes (-96dB ~ +24dB) | Yes (-96dB ~ +24dB) | ||||
ATT | -96dB ~ 0dB | -96dB ~ 0dB |
RIVAGE PM10 (excluding I/O RACK) |
|||
Mixing Capacity | Input Mixing Channels | 144mono | |
Mix Buses | 72 | ||
Matrices | 36 (Input to Matrix supported) | ||
Stereo Buses | 2 | ||
Mono Buses | 1 | ||
Cue Bus | 2 | ||
Local Connectors | Analog Input | XLR | 8 |
Analog Output | XLR | 8 | |
Expansion Slots | HY Slots | 4 (DSP-R10) | |
MY Slots | CS-R10: 2 DSP-R10: 2 |
||
Digital In | AES/EBU | 4 | |
Digital Out | AES/EBU | 4 | |
GPI | IN (D-Sub) | 8 (CS-R10) / 8 (DSP-R10) | |
Out (D-Sub) | 8 (CS-R10) / 8 (DSP-R10) | ||
Word Clock I/O | Only Out (CS-R10) In / Out (DSP-R10) |
||
MIDI I/O | In / Out (CS-R10) In / Out (DSP-R10) |
||
USB | File | 4 | |
2 Track Rec/Play | 1 | ||
External Redundant PSU | Built-in dual power supply | ||
Meter Bridge | On screen | ||
Ethernet | Yes | ||
Lamp | 4 (CS-R10) / 3 (CS-R10-S) | ||
Talkback In | Yes | ||
Video Out | Yes | ||
TC In | Yes (DSP-R10) | ||
Fault Output | Yes (DSP-R10) | ||
Phones | 2 | ||
AC Inlet | CS-R10: 2 (V-Lock Type) DSP-R10: 2 (V-Lock Type) |
₦180,400.00 – ₦225,500.00
HS5 | ||
General specifications | ||
Speaker type | 2-way bi-amp powered studio monitor | |
Frequency range (-10bB) | 54Hz – 30Hz | |
Component | LF | 5” cone |
HF | 1” dome | |
Crossover | 2kHz | |
Output power | 70W (LF:45W, HF:25W) | |
I/O connectors | XLR3-31 type (balanced), PHONE (balanced) | |
Power consumption | 45W | |
Shape | Base-reflex type | |
Cabinet material | MDF | |
Dimensions | W | 170mm (6.7”) |
H | 285mm (11.2”) | |
D | 222mm (8.7”) | |
Net weight | 5.3kg (11.7 lbs.) | |
Others | LEVEL control (+4Db/center click),
EQ: HIGH TRIM switch (+/- 2Db at HF) / ROOM CONTROL Switch (o/-2/-4 Db UNDER 500Hz) |
₦372,000.00
DBR10 | ||
General specifications | ||
Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |
Frequency range (-10dB) | 55Hz – 20kHz | |
Nominal coverage | 90°
60° |
|
Components |
LF |
Diameter:10″ cone, Voice Coil:2″, Magnet:Ferrite |
HF |
Diaphragm:1″, Type: 1″ throat compression driver, Magnet:Ferrite | |
Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |
Output power | Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W) | |
Maximum output level (1m; on axis) | 129dB SPL | |
I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |
Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
Heat dissipation | Fan cooling, 4 speeds | |
Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |
Power consumption | 60W(1/8 Power Consumption), 18W(Idle) | |
Cabinet material | Plastic | |
Finish | Black | |
Handle | Top x 1 | |
Flying and mounting hardware | Bottom x 2 (Fit for M8 x 15 mm eyebolts) | |
Pole socket | 35mm (Bottom x 1) | |
Dimensions |
W | 308mm (12.1″) |
H | 493mm (19.4″) | |
D | 289mm (11.4″) | |
Net weight | 10.5 kg (23.2 lbs) |
₦260,000.00
MG166CX-USB | MG166C-USB | ||
Specifications | |||
Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT) | Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT) | |
Frequency Response | 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT) | Response 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT) | |
Hum & Noise | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum | |
Input Connectors | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 | |
Output Connectors | ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 | ST: 2, AUX SEND: 3, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 | |
Crosstalk | -70 dB @ 1 kHz | -70 dB @ 1 kHz |
₦685,440.00
C215V | ||
Size/Weight | ||
Dimensions | Width | 491mm |
Height | 1163mm | |
Depth | 593mm | |
Weight | Weight | 47.5kg |
Specifications | ||
Enclosure | Bass Reflex Type | |
Speaker unit (LF) | 15″ cone x 2 | |
Speaker unit (HF) | 2″ V.C.driver | |
Frequency Response | 42Hz-16kHz | |
Power Capacity (Noise) | 500W | |
Power Capacity (Program) | 1000W | |
Power Capacity (Maximum) | 2000W | |
Nominal Impedance | 4 ohms | |
Sensitivity | 99db SPL (1W, 1m) | |
Nominal Dispersion (Horizontal) | 90° | |
Nominal Dispersion (Vertical) | 40° | |
Crossover Frequency | 1.5kHz | |
Input Connectors | 1/4 ” Phone Jack x 2, Neutrik Speakon NL4MP x 2 | |
Speaker Units | – | |
Recommended Crossover | – |
₦1,075,200.00
01V962 | ||
Outline | ||
Mixing capability | Mixing channels | 32 Mono + 4 Stereo |
GROUP | 8 | |
AUX | 8 | |
MAIN | Stereo | |
Input channel functions | Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan | |
Output channel functions | Attenuator, 4-band PEQ, Compressor, Delay | |
On-board processors | 4x SPX multi effectors | |
I/O | Mic inputs | 12 |
Phantom power | +48V DC; ON/OFF per 4ch | |
Line inputs | 2x Stereo, 2x 2tr in | |
AD converter | 24-bit; 128-time over sampling | |
Line outputs | Stereo output, Monitor output, 4x Omni output | |
DA converter | 24-bit; 128-time over sampling | |
Digital I/O | ADAT (8-in/8-out), 2tr in/out | |
Expansion slots | Mini-YGDAI (16-in/16-out) | |
₦784,000.00 – ₦1,232,000.00
TF1 | ||
Outline | ||
Fader Configuration | 32 + 1 (Master) | |
Mixing Capacity | Input Channels
|
48 (40 mono + 2 stereo + 2 return) |
Aux Buses
|
20 (8 mono + 6 stereo) | |
Stereo Buses
|
1 | |
Sub Buses | 1 | |
Input channel functions | 8 DCA Groups | |
I/O | Inputs
|
16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
Outputs
|
16 (XLR) | |
Expansion slots | 1 | |
On-board processors | DSP | 8 Effects + 10 GEQ |
USB | 34×34 USB Audio Interface, 2-track recording via USB Storage Device | |
General specifications | ||
Sampling frequency rate | Internal | 48 kHz |
Signal delay | Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz | |
Fader | 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders | |
Total harmonic distortion | Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) | |
Frequency response | +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT | |
Dynamic range | 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. | |
Hum & noise level | Equivalent input noise
|
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
Residual output noise | –85 dBu, ST master off (Measured with an A-Weight filter) | |
Crosstalk | –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. | |
Power requirements | 100–240 V 50/60 Hz | |
Power consumption | 120 W | |
Dimensions | W | 510 mm (20.1in) |
H | 225 mm (8.9in) | |
D | 599 mm (23.6in) | |
Net weight | 20.0 kg (44.1lb) | |
Accessories | Quick Guide, Power Cord, CUBASE AI download information | |
Options | Expansion Card, Foot Switch (FC5) | |
Others | Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
₦967,395.00 – ₦1,302,262.00
DSR115 | ||
General specifications | ||
Speaker type | 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | |
Frequency range
(-10dB) |
45Hz ~ 20kHz | |
Frequency response
(-3dB) |
55Hz ~ 18kHz | |
Nominal coverage | H | 90° |
V | 60° | |
Components | LF | 15″ cone |
HF |
2″ Titanium diaphragm compression driver | |
Crossover | FIR-X tuning (linear phase FIR filter) | |
Output power | 1500W (LF: 1020W, HF: 480W) | |
Maximum output level (1m; on axis) | 136dB SPL | |
I/O connectors | INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | |
Processors | D-CONTOUR (Dynamic CONTOUR) | |
Power consumption | 100W | |
Dimensions | W | 467mm (18 3/8″) |
H | 1158mm (45 5/8″) | |
D | 520mm (20 4/8″) | |
Net weight | 28.0kg (62lbs) | |
Flying and mounting hardware | 3 x M10 (TOP L/R 1pc each, Bottom rear 1pc) | |
Pole socket | 35mm (Bottom Board) |
Reviews