0item(s) - ₦0.00
Reco Plaza, Alaba International Market, Lagos   Support@gomacmusicng.com   +2344017740420

DSR118

Home  /  Professional Audio  /  Speakers

DSR112 ₦967,395.00
DBR15 ₦372,075.00
Sidebar
dsr112_z_0011_f
dsr112_a_0001_f
dsr112_a_0002_f
dsr112_p_0002_f
dsr112_p_0003_f
dsr112_p_0004_f
dsr112_p_0005_f
dsr112_p_0007_f
dsr112_z_0001_f
dsr112_z_0002_f
dsr112_z_0003_f

DSR118

₦967,395.00 – ₦1,302,262.00

  DSR118
General specifications  
Speaker type 18″ Powered Subwoofer, Bass-reflex Type
Frequency range

(-10dB)

 40Hz ~ 130Hz
Frequency response

(-3dB)

 50Hz ~ 110Hz
Nominal coverage H  
V  
Components LF  18″ cone
 

HF

  
Crossover    
Output power   1020W
Maximum output level (1m; on axis)   132dB SPL
I/O connectors   INPUT: XLR-3-31 x2 (Balanced) OUTPUT: XLR-3-32 x2 (Balanced) Parallel connection with INPUT
Processors   –
Power consumption   100W
Dimensions W  370mm (14 5/8″)
H 638mm (25 2/8″)
D 368mm (14 4/8″)
Net weight   42.0kg (93lbs)
Flying and mounting hardware    –
Pole socket    35mm (Bottom Board)
Clear selection
Add to Wishlist
SKU: 11382 Categories: ,
  DSR118
General specifications  
Speaker type 18″ Powered Subwoofer, Bass-reflex Type
Frequency range

(-10dB)

 40Hz ~ 130Hz
Frequency response

(-3dB)

 50Hz ~ 110Hz
Nominal coverage H  
V  
Components LF  18″ cone
 

HF

  
Crossover    
Output power   1020W
Maximum output level (1m; on axis)   132dB SPL
I/O connectors   INPUT: XLR-3-31 x2 (Balanced) OUTPUT: XLR-3-32 x2 (Balanced) Parallel connection with INPUT
Processors   –
Power consumption   100W
Dimensions W  370mm (14 5/8″)
H 638mm (25 2/8″)
D 368mm (14 4/8″)
Net weight   42.0kg (93lbs)
Flying and mounting hardware    –
Pole socket    35mm (Bottom Board)

 

 

Weight N/A
Variations

DSR215, DSR115, DSR112, DSR118

Reviews

Be the first to review “DSR118”

*

Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products
Add to cart
Add to Wishlist

Interfaces

₦260,000.00
General Specifications
Audio channels 16IN / 16OUT
Sample rates 44.1kHz, 48kHz, 88.2kHz and 96kHz
Sample rate pull-up/down +4.1667, +0.1, -0.1, and – 4.0 %
Sample bit-depth 16, 24 or 32-bit PCM
Network 2 x Gigabit (1000Mbps) Ethernet RJ45 connectors
Redundancy Glitch-free Dante audio redundancy using dual Ethernet networks (redundant mode)
Daisy chaining Daisy chain multiple Dante-MY16-AUD2 cards together (switched mode)
HA Remote Support for HA Remote capable Yamaha products
Expandable Install up to four Dante-MY16-AUD2 cards in available MY16-compatible slots for up to 64×64 audio channels
Compatible Yamaha equipments
Digital Mixers CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i
Interfaces RSio64-D
Processors MRX7-D, MTX5-D, DME24N, DME64N
Power Amps TX4n, TX5n, TX6n

 

Add to cart
Add to Wishlist
Read more
Add to Wishlist

CL Series

 

    CL5 CL3 CL1 QL5 QL1
Mixing Capacity Input Mixing Channels 72 mono + 8 stereo 64 mono + 8 stereo 48 mono + 8 stereo 64 mono + 8 stereo 32 mono + 8 stereo
Mix Buses 24     16  
Matrices 8 (Input to Matrix supported)     8 (Input to Matrix supported)  
Stereo Bus 1     1  
Mono 1     1  
Cue 1 (Second Cue Bus supported in CL V4.0 or later)     1 (Second Cue Bus supported in QL V4.0 or later)  
Local Connectors Analog Inputs 8     32 16
Analog Outputs 8     16 8
MY Slots 3     2  
Dante I/O Primary / Secondary     Primary / Secondary  
Digital Out 1 (AES/EBU)     1 (AES/EBU)  
GPI 5 in / 5 out (CL V1.11 or later)     5 in / 5 out  
Word Clock I/O Yes     Yes  
MIDI I/O In / Out     In / Out  
External Redundant PSU Optional PW800W     No  
Meter Bridge Output meter built-in     Optional MBCL No
Ethernet Yes     Yes  
AC Inlet V-Lock Type     V-Lock Type  
Scene Memory Number of Scenes 300     300  
Recall Safe Yes     Yes  
Focus Recall Yes     Yes  
Fade Time Yes (0s ~ 60s)     Yes (0s ~ 60s)  
Preview Yes (CL V1.51 or later)     Yes  
Selective Load / Save Yes (CL V1.7 or later)     Yes  
Tactile Control Keys Yes     No (on-screen)  
Input Channel Functions Gain Compensation Yes     Yes  
Digital Gain Yes (-96dB ~ +24dB)     Yes (-96dB ~ +24dB)  
ATT -96dB ~ 0dB     -96dB ~ 0dB  
Read more
Add to Wishlist
Select options
Add to Wishlist

DSR215

₦967,395.00 – ₦1,302,262.00
  DSR215
General specifications  
Speaker type Dual 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type
Frequency range

(-10dB)

 45Hz ~ 20kHz
Frequency response

(-3dB)

 55Hz ~ 18kHz
Nominal coverage H 90°
V 60°
Components LF 2 x 15″ cone
 

HF

 2″ Titanium diaphragm compression driver
Crossover   FIR-X tuning (linear phase FIR filter)
Output power   1500W (LF: 1020W, HF: 480W)
Maximum output level (1m; on axis)   138dB SPL
I/O connectors   INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT
Processors   D-CONTOUR (Dynamic CONTOUR)
Power consumption   100W
Dimensions W 520mm (20 4/8″)
H 638mm (25 2/8″)
D 584mm (23″)
Net weight   49.8kg (110lbs)
Flying and mounting hardware   –
Pole socket   –

 

Select options
Add to Wishlist
Read more
Add to Wishlist

MG166c

  MG166CX MG166C
Specifications
Total Harmonic Distortion Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT) Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT)
Frequency Response 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT) Response 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT)
Hum & Noise -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum
Input Connectors MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1
Output Connectors ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 ST: 2, AUX SEND: 3, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1
Crosstalk -70 dB @ 1 kHz -70 dB @ 1 kHz
Read more
Add to Wishlist
Add to cart
Add to Wishlist

MG 102

₦260,000.00
Add to cart
Add to Wishlist
Read more
Add to Wishlist

PM Series

RIVAGE PM10
(excluding I/O RACK)
Mixing Capacity Input Mixing Channels   144mono
Mix Buses   72
Matrices   36 (Input to Matrix supported)
Stereo Buses   2
Mono Buses   1
Cue Bus   2
Local Connectors Analog Input XLR 8
Analog Output XLR 8
Expansion Slots HY Slots 4 (DSP-R10)
  MY Slots CS-R10: 2
DSP-R10: 2
Digital In AES/EBU 4
Digital Out AES/EBU 4
GPI IN (D-Sub) 8 (CS-R10) / 8 (DSP-R10)
  Out (D-Sub) 8 (CS-R10) / 8 (DSP-R10)
Word Clock I/O   Only Out (CS-R10)
In / Out (DSP-R10)
MIDI I/O   In / Out (CS-R10)
In / Out (DSP-R10)
USB File 4
  2 Track Rec/Play 1
External Redundant PSU   Built-in dual power supply
Meter Bridge   On screen
Ethernet   Yes
Lamp   4 (CS-R10) / 3 (CS-R10-S)
Talkback In   Yes
Video Out   Yes
TC In   Yes (DSP-R10)
Fault Output   Yes (DSP-R10)
Phones   2
AC Inlet   CS-R10: 2 (V-Lock Type)
DSP-R10: 2 (V-Lock Type)
Read more
Add to Wishlist
Add to cart
Add to Wishlist

HS Series

₦219,802.00
    HS8 HS5
General specifications
Speaker type   2-way bi-amp powered studio monitor 2-way bi-amp powered studio monitor
Frequency range (-10dB)   38Hz – 30kHz 54Hz – 30kHz
Components LF 8″ cone 5″ cone
HF 1″ dome 1″ dome
Crossover   2kHz 2kHz
Output power   120W (LF:75W, HF:45W) 70W (LF:45W, HF:25W)
I/O connectors   XLR3-31 type (balanced), PHONE (balanced) XLR3-31 type (balanced), PHONE (balanced)
Power consumption   60W 45W
Shape   Bass-reflex type Bass-reflex type
Cabinet material   MDF MDF
Dimensions W 250mm (9.8″) 170mm (6.7″)
H 390mm (15.4″) 285mm (11.2″)
D 334mm (13.1″) 222mm (8.7″)
Net weight   10.2kg (22.5 lbs.) 5.3kg (11.7 lbs.)
Others   LEVEL control (+4dB/center click) , EQ: HIGH TRIM switch (+/- 2dB at HF) / ROOM CONTROL switch (0/-2/-4 dB under 500Hz) LEVEL control (+4dB/center click) , EQ: HIGH TRIM switch (+/- 2dB at HF) / ROOM CONTROL switch (0/-2/-4 dB under 500Hz)
Add to cart
Add to Wishlist
Add to cart
Add to Wishlist

DBR

₦393,800.00
   
General specifications
Speaker type  
Frequency range (-10dB)  
Nominal coverage  
 
Components  
 
Crossover  
Output power  
Maximum output level (1m; on axis)  
I/O connectors  
Processors  
Add to cart
Add to Wishlist
Add to cart
Add to Wishlist

CBR-10,12,15

₦236,500.00
    CBR15 CBR12 CBR10
    General specifications General specifications General specifications
Speaker type   2-way Speaker, Bass-reflex Type 2-way Speaker, Bass-reflex Type 2-way Speaker, Bass-reflex Type
Frequency range (-10dB)   46 Hz – 20 kHz 48 Hz – 20 kHz 50 Hz – 20 kHz
Nominal coverage H 90° 90° 90°
V 60° 60° 60°
Components LF 15″ Cone, 2.5″ Voice Coil (Ferrite Magnet) 12″ Cone, 2″ Voice Coil (Ferrite Magnet) 10″ Cone, 2″ Voice Coil (Ferrite Magnet)
HF 1.4″ Voice Coil, Compression Driver (Ferrite Magnet) 1.4″ Voice Coil, Compression Driver (Ferrite Magnet) 1″ Voice Coil, Compression Driver (Ferrite Magnet)
Crossover   2.0 kHz 2.1 kHz 2.8 kHz
Power rating NOISE 250W 175W 175W
PGM 500W 350W 350W
PEAK 1000W 700W 700W
Nominal impedance   8Ω 8Ω 8Ω
SPL Sensitivity (1W; 1m on axis) 96dB SPL 96dB SPL 94dB SPL
Peak (Calculated) 126 dB SPL 125 dB SPL 123 dB SPL
I/O connectors   1/4″ Phone x 1, speakON NL4MP x 1 1/4″ Phone x 1, speakON NL4MP x 1 1/4″ Phone x 1, speakON NL4MP x 1
Cabinet material   Plastic Plastic Plastic
Finish   Black Black Black
Handle   Side x 2 Side x 2 Top x 1
Flying and mounting hardware   Bottom x 2, Rear x 1 (Fit for M8 x 15mm Eyebolts) Bottom x 2, Rear x 1 (Fit for M8 x 15mm Eyebolts) Bottom x 2, Rear x 1 (Fit for M8 x 15mm Eyebolts)
Pole socket   Φ35 mm　Bottom x 1 Φ35 mm　Bottom x 1 Φ35 mm　Bottom x 1
Dimensions W 455mm (17.9″) 376mm (14.8″) 308mm (12.1″)
H 700mm (27.6″) 601mm (23.7″) 493mm (19.4″)
D 378mm (14.9″) 348mm (13.7″) 289mm (11.4″)
Net weight   17.7 kg (39.0 lbs) 13.9 kg (30.6 lbs) 9.4 kg (20.7 lbs)

 

Add to cart
Add to Wishlist
Read more
Add to Wishlist

CL Series

  CL5 CL3 CL1 QL5 QL1
Mixing Capacity Input Mixing Channels 72 mono + 8 stereo 64 mono + 8 stereo 48 mono + 8 stereo 64 mono + 8 stereo 32 mono + 8 stereo
Mix Buses 24 16
Matrices 8 (Input to Matrix supported) 8 (Input to Matrix supported)
Stereo Bus 1 1
Mono 1 1
Cue 1 (Second Cue Bus supported in CL V4.0 or later) 1 (Second Cue Bus supported in QL V4.0 or later)
Local Connectors Analog Inputs 8 32 16
Analog Outputs 8 16 8
MY Slots 3 2
Dante I/O Primary / Secondary Primary / Secondary
Digital Out 1 (AES/EBU) 1 (AES/EBU)
GPI 5 in / 5 out (CL V1.11 or later) 5 in / 5 out
Word Clock I/O Yes Yes
MIDI I/O In / Out In / Out
External Redundant PSU Optional PW800W No
Meter Bridge Output meter built-in Optional MBCL No
Ethernet Yes Yes
AC Inlet V-Lock Type V-Lock Type
Read more
Add to Wishlist
Navigation

MY CART

Close

No products in the cart.

No products in the cart.