0item(s) - ₦0.00
Reco Plaza, Alaba International Market, Lagos   Support@gomacmusicng.com   +2344017740420

DSR112

Home  /  Professional Audio  /  Speakers

DSR115 ₦967,395.00
DSR118 ₦967,395.00
Sidebar
dsr112_z_0011_f
dsr112_a_0001_f
dsr112_a_0002_f
dsr112_p_0002_f
dsr112_p_0003_f
dsr112_p_0004_f
dsr112_p_0005_f
dsr112_p_0007_f
dsr112_z_0001_f
dsr112_z_0002_f
dsr112_z_0003_f

DSR112

₦967,395.00 – ₦1,302,262.00

DSR112
General specifications
Speaker type 12″ 2-way, Bi-amp Powered Speaker, Bass-reflex Type
Frequency range

(-10dB)

 55Hz ~ 20kHz
Frequency response

(-3dB)

 60Hz ~ 18kHz
Nominal coverage H 90°
V 60°
Components LF  12″ cone
 

HF

 2″ Titanium diaphragm compression driver
Crossover FIR-X tuning (linear phase FIR filter) 1.7kHz
Output power 1500W (LF: 1020W, HF: 480W)
Maximum output level (1m; on axis) 134dB SPL
I/O connectors INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT
Processors D-CONTOUR (Dynamic CONTOUR)
Power consumption 100W
Dimensions W  442mm (17 4/8″)
H 755mm (29 6/8″)
D 423mm (16 4/8″)
Net weight  21.2kg (47lbs)
Flying and mounting hardware  3 x M10 (TOP L/R 1pc each, Bottom rear 1pc)
Pole socket  35mm (Bottom Board)

 

Clear selection
Add to Wishlist
SKU: 11377 Categories: ,
DSR112
General specifications
Speaker type 12″ 2-way, Bi-amp Powered Speaker, Bass-reflex Type
Frequency range

(-10dB)

 55Hz ~ 20kHz
Frequency response

(-3dB)

 60Hz ~ 18kHz
Nominal coverage H 90°
V 60°
Components LF  12″ cone
 

HF

 2″ Titanium diaphragm compression driver
Crossover FIR-X tuning (linear phase FIR filter) 1.7kHz
Output power 1500W (LF: 1020W, HF: 480W)
Maximum output level (1m; on axis) 134dB SPL
I/O connectors INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT
Processors D-CONTOUR (Dynamic CONTOUR)
Power consumption 100W
Dimensions W  442mm (17 4/8″)
H 755mm (29 6/8″)
D 423mm (16 4/8″)
Net weight  21.2kg (47lbs)
Flying and mounting hardware  3 x M10 (TOP L/R 1pc each, Bottom rear 1pc)
Pole socket  35mm (Bottom Board)

 

Weight N/A
Variations

DSR215, DSR115, DSR112, DSR118

Reviews

Be the first to review “DSR112”

*

Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products
Read more
Add to Wishlist

HS Series

    HS8 HS5
General specifications
Speaker type   2-way bi-amp powered studio monitor 2-way bi-amp powered studio monitor
Frequency range (-10dB)   38Hz – 30kHz 54Hz – 30kHz
Components LF 8″ cone 5″ cone
HF 1″ dome 1″ dome
Crossover   2kHz 2kHz
Output power   120W (LF:75W, HF:45W) 70W (LF:45W, HF:25W)
I/O connectors   XLR3-31 type (balanced), PHONE (balanced) XLR3-31 type (balanced), PHONE (balanced)
Power consumption   60W 45W
Shape   Bass-reflex type Bass-reflex type
Cabinet material   MDF MDF
Dimensions W 250mm (9.8″) 170mm (6.7″)
H 390mm (15.4″) 285mm (11.2″)
D 334mm (13.1″) 222mm (8.7″)
Net weight   10.2kg (22.5 lbs.) 5.3kg (11.7 lbs.)
Others   LEVEL control (+4dB/center click) , EQ: HIGH TRIM switch (+/- 2dB at HF) / ROOM CONTROL switch (0/-2/-4 dB under 500Hz) LEVEL control (+4dB/center click) , EQ: HIGH TRIM switch (+/- 2dB at HF) / ROOM CONTROL switch (0/-2/-4 dB under 500Hz)
Read more
Add to Wishlist
Add to cart
Add to Wishlist

DBR10

₦372,000.00
DBR10
General specifications
Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type
Frequency range (-10dB) 55Hz – 20kHz
Nominal coverage 90°

60°
Components  

 

LF

 Diameter:10″ cone, Voice Coil:2″, Magnet:Ferrite
 

 

HF

 Diaphragm:1″, Type: 1″ throat compression driver, Magnet:Ferrite
Crossover 2.1kHz: FIR-X tuning™ (linear phase FIR filter)
Output power Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W)
Maximum output level (1m; on axis) 129dB SPL
I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Processors D-CONTOUR: FOH/MAIN, MONITOR, OFF
Heat dissipation Fan cooling, 4 speeds
Power requirements 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
Power consumption 60W(1/8 Power Consumption), 18W(Idle)
Cabinet material Plastic
Finish Black
Handle Top x 1
Flying and mounting hardware Bottom x 2 (Fit for M8 x 15 mm eyebolts)
Pole socket 35mm (Bottom x 1)
 

Dimensions

 W 308mm (12.1″)
H 493mm (19.4″)
D 289mm (11.4″)
Net weight 10.5 kg (23.2 lbs)
Add to cart
Add to Wishlist
Add to cart
Add to Wishlist

MG Braquet

₦260,000.00
Add to cart
Add to Wishlist
Select options
Add to Wishlist

TF1

₦784,000.00 – ₦1,232,000.00
    TF1
Outline    
Fader Configuration 32 + 1 (Master)  
Mixing Capacity Input Channels

 

 

 48 (40 mono + 2 stereo + 2 return)
Aux Buses

 

 20 (8 mono + 6 stereo)
Stereo Buses

 

 1
Sub Buses 1
Input channel functions 8 DCA Groups  
I/O Inputs

 

 

 16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
Outputs

 

 16 (XLR)
Expansion slots 1
On-board processors  DSP 8 Effects + 10 GEQ
USB 34×34 USB Audio Interface, 2-track recording via USB Storage Device  
General specifications    
Sampling frequency rate Internal 48 kHz
Signal delay Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz  
Fader 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders  
Total harmonic distortion Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)  
Frequency response +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT  
Dynamic range 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.  
Hum & noise level Equivalent input noise

 

 

 –128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)
Residual output noise –85 dBu, ST master off (Measured with an A-Weight filter)
Crosstalk –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.  
Power requirements 100–240 V 50/60 Hz  
Power consumption 120 W  
Dimensions W 510 mm (20.1in)
H 225 mm (8.9in)
D 599 mm (23.6in)
Net weight 20.0 kg (44.1lb)  
Accessories Quick Guide, Power Cord, CUBASE AI download information  
Options Expansion Card, Foot Switch (FC5)  
Others Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C  

 

 

 

Select options
Add to Wishlist
Select options
Add to Wishlist

DBR12

₦372,075.00 – ₦533,307.00
  DBR12
General specifications  
Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type
Frequency range (-10dB) 52Hz – 20kHz
Nominal coverage   90°

60°
Components  

 

LF

 Diameter:12″ cone, Voice Coil:2″, Magnet:Ferrite
 

 

HF

 Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite
Crossover   2.1kHz: FIR-X tuning™ (linear phase FIR filter)
Output power   Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W)
Maximum output level (1m; on axis)   131dB SPL
I/O connectors   INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Processors   D-CONTOUR: FOH/MAIN, MONITOR, OFF
Heat dissipation   Fan cooling, 4 speeds
Power requirements   100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
Power consumption   74W(1/8 Power Consumption), 18W(Idle)
Cabinet material   Plastic
Finish   Black
Handle   Side x 2
Flying and mounting hardware   Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
Pole socket   35mm (Bottom x 1)
 

Dimensions

 W 376mm (14.8″)
H 601mm (23.7″)
D 348mm (13.7″)
Net weight   15.8 kg (34.8 lbs)

 

Select options
Add to Wishlist
Add to cart
Add to Wishlist

MG 112

₦260,000.00
  MG166CX-USB MG166C-USB
Specifications
Total Harmonic Distortion Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT) Less than 0.1 % (THD+N) 20 Hz – 20 kHz @ +14 dBu (ST OUT)
Frequency Response 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT) Response 0, +1, -3 dB 20 Hz – 20 kHz @ +4 dBu (ST OUT)
Hum & Noise -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz – 20 kHz, Rs = 150 Ω, Input Gain = Maximum
Input Connectors MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1
Output Connectors ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 ST: 2, AUX SEND: 3, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1
Crosstalk -70 dB @ 1 kHz -70 dB @ 1 kHz
Add to cart
Add to Wishlist
Select options
Add to Wishlist

DSR115

₦967,395.00 – ₦1,302,262.00
DSR115
General specifications
Speaker type 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type
Frequency range

(-10dB)

 45Hz ~ 20kHz
Frequency response

(-3dB)

 55Hz ~ 18kHz
Nominal coverage H 90°
V 60°
Components LF  15″ cone
 

HF

 2″ Titanium diaphragm compression driver
Crossover FIR-X tuning (linear phase FIR filter)
Output power 1500W (LF: 1020W, HF: 480W)
Maximum output level (1m; on axis) 136dB SPL
I/O connectors INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT
Processors D-CONTOUR (Dynamic CONTOUR)
Power consumption 100W
Dimensions W  467mm (18 3/8″)
H 1158mm (45 5/8″)
D 520mm (20 4/8″)
Net weight 28.0kg (62lbs)
Flying and mounting hardware  3 x M10 (TOP L/R 1pc each, Bottom rear 1pc)
Pole socket  35mm (Bottom Board)

 

Select options
Add to Wishlist
Select options
Add to Wishlist

HS5

₦180,400.00 – ₦225,500.00
  HS5  
General specifications    
Speaker type   2-way bi-amp powered studio monitor
Frequency range (-10bB)   54Hz – 30Hz
Component LF 5” cone
HF 1” dome
Crossover   2kHz
Output power   70W (LF:45W, HF:25W)
I/O connectors   XLR3-31 type (balanced), PHONE (balanced)
Power consumption   45W
Shape   Base-reflex type
Cabinet material   MDF
Dimensions W 170mm (6.7”)
H 285mm (11.2”)
D 222mm (8.7”)
Net weight   5.3kg (11.7 lbs.)
Others   LEVEL control (+4Db/center click),

EQ: HIGH TRIM switch

(+/- 2Db at HF) /

ROOM CONTROL

Switch (o/-2/-4 Db UNDER 500Hz)
Select options
Add to Wishlist
Select options
Add to Wishlist

DSR118

₦967,395.00 – ₦1,302,262.00
  DSR118
General specifications  
Speaker type 18″ Powered Subwoofer, Bass-reflex Type
Frequency range

(-10dB)

 40Hz ~ 130Hz
Frequency response

(-3dB)

 50Hz ~ 110Hz
Nominal coverage H  
V  
Components LF  18″ cone
 

HF

  
Crossover    
Output power   1020W
Maximum output level (1m; on axis)   132dB SPL
I/O connectors   INPUT: XLR-3-31 x2 (Balanced) OUTPUT: XLR-3-32 x2 (Balanced) Parallel connection with INPUT
Processors   –
Power consumption   100W
Dimensions W  370mm (14 5/8″)
H 638mm (25 2/8″)
D 368mm (14 4/8″)
Net weight   42.0kg (93lbs)
Flying and mounting hardware    –
Pole socket    35mm (Bottom Board)
Select options
Add to Wishlist
Read more
Add to Wishlist

C215

 

    C215V
Size/Weight
Dimensions Width 491mm
Height 1163mm
Depth 593mm
Weight Weight 47.5kg
Specifications
Enclosure   Bass Reflex Type
Speaker unit (LF)   15″ cone x 2
Speaker unit (HF)   2″ V.C.driver
Frequency Response   42Hz-16kHz
Power Capacity (Noise)   500W
Power Capacity (Program)   1000W
Power Capacity (Maximum)   2000W
Nominal Impedance   4 ohms
Sensitivity   99db SPL (1W, 1m)
Nominal Dispersion (Horizontal)   90°
Nominal Dispersion (Vertical)   40°

 

Read more
Add to Wishlist
Navigation

MY CART

Close

No products in the cart.

No products in the cart.