| DBR12 | ||
| General specifications | ||
| Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |
| Frequency range (-10dB) | 52Hz – 20kHz | |
| Nominal coverage | 90°
60° |
|
| Components |
LF |
Diameter:12″ cone, Voice Coil:2″, Magnet:Ferrite |
|
HF |
Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite | |
| Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |
| Output power | Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) | |
| Maximum output level (1m; on axis) | 131dB SPL | |
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
| Heat dissipation | Fan cooling, 4 speeds | |
| Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |
| Power consumption | 74W(1/8 Power Consumption), 18W(Idle) | |
| Cabinet material | Plastic | |
| Finish | Black | |
| Handle | Side x 2 | |
| Flying and mounting hardware | Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) | |
| Pole socket | 35mm (Bottom x 1) | |
|
Dimensions |
W | 376mm (14.8″) |
| H | 601mm (23.7″) | |
| D | 348mm (13.7″) | |
| Net weight | 15.8 kg (34.8 lbs) | |
DBR12
₦372,075.00 – ₦533,307.00
| DBR12 | ||
| General specifications | ||
| Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |
| Frequency range (-10dB) | 52Hz – 20kHz | |
| Nominal coverage | 90°
60° |
|
| Components |
LF |
Diameter:12″ cone, Voice Coil:2″, Magnet:Ferrite |
|
HF |
Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite | |
| Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |
| Output power | Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) | |
| Maximum output level (1m; on axis) | 131dB SPL | |
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
| Heat dissipation | Fan cooling, 4 speeds | |
| Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |
| Power consumption | 74W(1/8 Power Consumption), 18W(Idle) | |
| Cabinet material | Plastic | |
| Finish | Black | |
| Handle | Side x 2 | |
| Flying and mounting hardware | Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) | |
| Pole socket | 35mm (Bottom x 1) | |
|
Dimensions |
W | 376mm (14.8″) |
| H | 601mm (23.7″) | |
| D | 348mm (13.7″) | |
| Net weight | 15.8 kg (34.8 lbs) | |
| Weight | N/A |
|---|---|
| Variations | DBR 10, DBR 12, DBR 15 |
Be the first to review “DBR12”
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products
| CL5 | CL3 | CL1 | QL5 | QL1 | ||
| Mixing Capacity | Input Mixing Channels | 72 mono + 8 stereo | 64 mono + 8 stereo | 48 mono + 8 stereo | 64 mono + 8 stereo | 32 mono + 8 stereo |
| Mix Buses | 24 | 16 | ||||
| Matrices | 8 (Input to Matrix supported) | 8 (Input to Matrix supported) | ||||
| Stereo Bus | 1 | 1 | ||||
| Mono | 1 | 1 | ||||
| Cue | 1 (Second Cue Bus supported in CL V4.0 or later) | 1 (Second Cue Bus supported in QL V4.0 or later) | ||||
| Local Connectors | Analog Inputs | 8 | 32 | 16 | ||
| Analog Outputs | 8 | 16 | 8 | |||
| MY Slots | 3 | 2 | ||||
| Dante I/O | Primary / Secondary | Primary / Secondary | ||||
| Digital Out | 1 (AES/EBU) | 1 (AES/EBU) | ||||
| GPI | 5 in / 5 out (CL V1.11 or later) | 5 in / 5 out | ||||
| Word Clock I/O | Yes | Yes | ||||
| MIDI I/O | In / Out | In / Out | ||||
| External Redundant PSU | Optional PW800W | No | ||||
| Meter Bridge | Output meter built-in | Optional MBCL | No | |||
| Ethernet | Yes | Yes | ||||
| AC Inlet | V-Lock Type | V-Lock Type | ||||
| Scene Memory | Number of Scenes | 300 | 300 | |||
| Recall Safe | Yes | Yes | ||||
| Focus Recall | Yes | Yes | ||||
| Fade Time | Yes (0s ~ 60s) | Yes (0s ~ 60s) | ||||
| Preview | Yes (CL V1.51 or later) | Yes | ||||
| Selective Load / Save | Yes (CL V1.7 or later) | Yes | ||||
| Tactile Control Keys | Yes | No (on-screen) | ||||
| Input Channel Functions | Gain Compensation | Yes | Yes | |||
| Digital Gain | Yes (-96dB ~ +24dB) | Yes (-96dB ~ +24dB) | ||||
| ATT | -96dB ~ 0dB | -96dB ~ 0dB | ||||
| HPF | 20Hz ~ 600Hz, -6 or -12dB/oct Selectable (CL V1.51 or later) | 20Hz ~ 600Hz, -6 or -12dB/oct Selectable |
| RIVAGE PM10 (excluding I/O RACK) |
|||
| Mixing Capacity | Input Mixing Channels | 144mono | |
| Mix Buses | 72 | ||
| Matrices | 36 (Input to Matrix supported) | ||
| Stereo Buses | 2 | ||
| Mono Buses | 1 | ||
| Cue Bus | 2 | ||
| Local Connectors | Analog Input | XLR | 8 |
| Analog Output | XLR | 8 | |
| Expansion Slots | HY Slots | 4 (DSP-R10) | |
| MY Slots | CS-R10: 2 DSP-R10: 2 |
||
| Digital In | AES/EBU | 4 | |
| Digital Out | AES/EBU | 4 | |
| GPI | IN (D-Sub) | 8 (CS-R10) / 8 (DSP-R10) | |
| Out (D-Sub) | 8 (CS-R10) / 8 (DSP-R10) | ||
| Word Clock I/O | Only Out (CS-R10) In / Out (DSP-R10) |
||
| MIDI I/O | In / Out (CS-R10) In / Out (DSP-R10) |
||
| USB | File | 4 | |
| 2 Track Rec/Play | 1 | ||
| External Redundant PSU | Built-in dual power supply | ||
| Meter Bridge | On screen | ||
| Ethernet | Yes | ||
| Lamp | 4 (CS-R10) / 3 (CS-R10-S) | ||
| Talkback In | Yes | ||
| Video Out | Yes | ||
| TC In | Yes (DSP-R10) | ||
| Fault Output | Yes (DSP-R10) | ||
| Phones | 2 | ||
| AC Inlet | CS-R10: 2 (V-Lock Type) DSP-R10: 2 (V-Lock Type) |
₦180,400.00 – ₦225,500.00
| HS5 | ||
| General specifications | ||
| Speaker type | 2-way bi-amp powered studio monitor | |
| Frequency range (-10bB) | 54Hz – 30Hz | |
| Component | LF | 5” cone |
| HF | 1” dome | |
| Crossover | 2kHz | |
| Output power | 70W (LF:45W, HF:25W) | |
| I/O connectors | XLR3-31 type (balanced), PHONE (balanced) | |
| Power consumption | 45W | |
| Shape | Base-reflex type | |
| Cabinet material | MDF | |
| Dimensions | W | 170mm (6.7”) |
| H | 285mm (11.2”) | |
| D | 222mm (8.7”) | |
| Net weight | 5.3kg (11.7 lbs.) | |
| Others | LEVEL control (+4Db/center click),
EQ: HIGH TRIM switch (+/- 2Db at HF) / ROOM CONTROL Switch (o/-2/-4 Db UNDER 500Hz) |
₦967,395.00 – ₦1,302,262.00
| DSR115 | ||
| General specifications | ||
| Speaker type | 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | |
| Frequency range
(-10dB) |
45Hz ~ 20kHz | |
| Frequency response
(-3dB) |
55Hz ~ 18kHz | |
| Nominal coverage | H | 90° |
| V | 60° | |
| Components | LF | 15″ cone |
|
HF |
2″ Titanium diaphragm compression driver | |
| Crossover | FIR-X tuning (linear phase FIR filter) | |
| Output power | 1500W (LF: 1020W, HF: 480W) | |
| Maximum output level (1m; on axis) | 136dB SPL | |
| I/O connectors | INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | |
| Processors | D-CONTOUR (Dynamic CONTOUR) | |
| Power consumption | 100W | |
| Dimensions | W | 467mm (18 3/8″) |
| H | 1158mm (45 5/8″) | |
| D | 520mm (20 4/8″) | |
| Net weight | 28.0kg (62lbs) | |
| Flying and mounting hardware | 3 x M10 (TOP L/R 1pc each, Bottom rear 1pc) | |
| Pole socket | 35mm (Bottom Board) | |
| QL5 | QL1 | ||
| Mixing Capacity | Input Mixing Channels | 64 mono + 8 stereo | 32 mono + 8 stereo |
| Mix Buses | 16 | ||
| Matrices | 8 (Input to Matrix supported) | ||
| Stereo Bus | 1 | ||
| Mono | 1 | ||
| Cue | 1 (Second Cue Bus supported in QL V4.0 or later) | ||
| Local Connectors | Analog Inputs | 32 | 16 |
| Analog Outputs | 16 | 8 | |
| MY Slots | 2 | ||
| Dante I/O | Primary / Secondary | ||
| Digital Out | 1 (AES/EBU) | ||
| GPI | 5 in / 5 out | ||
| Word Clock I/O | Yes | ||
| MIDI I/O | In / Out | ||
| External Redundant PSU | No | ||
| Meter Bridge | Optional MBCL | No | |
| Ethernet | Yes | ||
| AC Inlet | V-Lock Type |
| C215V | ||
| Size/Weight | ||
| Dimensions | Width | 491mm |
| Height | 1163mm | |
| Depth | 593mm | |
| Weight | Weight | 47.5kg |
| Specifications | ||
| Enclosure | Bass Reflex Type | |
| Speaker unit (LF) | 15″ cone x 2 | |
| Speaker unit (HF) | 2″ V.C.driver | |
| Frequency Response | 42Hz-16kHz | |
| Power Capacity (Noise) | 500W | |
| Power Capacity (Program) | 1000W | |
| Power Capacity (Maximum) | 2000W | |
| Nominal Impedance | 4 ohms | |
| Sensitivity | 99db SPL (1W, 1m) | |
| Nominal Dispersion (Horizontal) | 90° | |
| Nominal Dispersion (Vertical) | 40° | |
₦685,440.00
| C215V | ||
| Size/Weight | ||
| Dimensions | Width | 491mm |
| Height | 1163mm | |
| Depth | 593mm | |
| Weight | Weight | 47.5kg |
| Specifications | ||
| Enclosure | Bass Reflex Type | |
| Speaker unit (LF) | 15″ cone x 2 | |
| Speaker unit (HF) | 2″ V.C.driver | |
| Frequency Response | 42Hz-16kHz | |
| Power Capacity (Noise) | 500W | |
| Power Capacity (Program) | 1000W | |
| Power Capacity (Maximum) | 2000W | |
| Nominal Impedance | 4 ohms | |
| Sensitivity | 99db SPL (1W, 1m) | |
| Nominal Dispersion (Horizontal) | 90° | |
| Nominal Dispersion (Vertical) | 40° | |
| Crossover Frequency | 1.5kHz | |
| Input Connectors | 1/4 ” Phone Jack x 2, Neutrik Speakon NL4MP x 2 | |
| Speaker Units | – | |
| Recommended Crossover | – | |
₦967,395.00 – ₦1,302,262.00
| DSR215 | ||
| General specifications | ||
| Speaker type | Dual 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | |
| Frequency range
(-10dB) |
45Hz ~ 20kHz | |
| Frequency response
(-3dB) |
55Hz ~ 18kHz | |
| Nominal coverage | H | 90° |
| V | 60° | |
| Components | LF | 2 x 15″ cone |
|
HF |
2″ Titanium diaphragm compression driver | |
| Crossover | FIR-X tuning (linear phase FIR filter) | |
| Output power | 1500W (LF: 1020W, HF: 480W) | |
| Maximum output level (1m; on axis) | 138dB SPL | |
| I/O connectors | INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | |
| Processors | D-CONTOUR (Dynamic CONTOUR) | |
| Power consumption | 100W | |
| Dimensions | W | 520mm (20 4/8″) |
| H | 638mm (25 2/8″) | |
| D | 584mm (23″) | |
| Net weight | 49.8kg (110lbs) | |
| Flying and mounting hardware | – | |
| Pole socket | – | |
Reviews