| DBR12 | ||
| General specifications | ||
| Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |
| Frequency range (-10dB) | 52Hz – 20kHz | |
| Nominal coverage | 90°
60° |
|
| Components |
LF |
Diameter:12″ cone, Voice Coil:2″, Magnet:Ferrite |
|
HF |
Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite | |
| Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |
| Output power | Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) | |
| Maximum output level (1m; on axis) | 131dB SPL | |
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
| Heat dissipation | Fan cooling, 4 speeds | |
| Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |
| Power consumption | 74W(1/8 Power Consumption), 18W(Idle) | |
| Cabinet material | Plastic | |
| Finish | Black | |
| Handle | Side x 2 | |
| Flying and mounting hardware | Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) | |
| Pole socket | 35mm (Bottom x 1) | |
|
Dimensions |
W | 376mm (14.8″) |
| H | 601mm (23.7″) | |
| D | 348mm (13.7″) | |
| Net weight | 15.8 kg (34.8 lbs) | |
DBR12
₦372,075.00 – ₦533,307.00
| DBR12 | ||
| General specifications | ||
| Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |
| Frequency range (-10dB) | 52Hz – 20kHz | |
| Nominal coverage | 90°
60° |
|
| Components |
LF |
Diameter:12″ cone, Voice Coil:2″, Magnet:Ferrite |
|
HF |
Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite | |
| Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |
| Output power | Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) | |
| Maximum output level (1m; on axis) | 131dB SPL | |
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
| Heat dissipation | Fan cooling, 4 speeds | |
| Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |
| Power consumption | 74W(1/8 Power Consumption), 18W(Idle) | |
| Cabinet material | Plastic | |
| Finish | Black | |
| Handle | Side x 2 | |
| Flying and mounting hardware | Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) | |
| Pole socket | 35mm (Bottom x 1) | |
|
Dimensions |
W | 376mm (14.8″) |
| H | 601mm (23.7″) | |
| D | 348mm (13.7″) | |
| Net weight | 15.8 kg (34.8 lbs) | |
| Weight | N/A |
|---|---|
| Variations | DBR 10, DBR 12, DBR 15 |
Be the first to review “DBR12”
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products
₦180,400.00 – ₦225,500.00
| HS5 | ||
| General specifications | ||
| Speaker type | 2-way bi-amp powered studio monitor | |
| Frequency range (-10bB) | 54Hz – 30Hz | |
| Component | LF | 5” cone |
| HF | 1” dome | |
| Crossover | 2kHz | |
| Output power | 70W (LF:45W, HF:25W) | |
| I/O connectors | XLR3-31 type (balanced), PHONE (balanced) | |
| Power consumption | 45W | |
| Shape | Base-reflex type | |
| Cabinet material | MDF | |
| Dimensions | W | 170mm (6.7”) |
| H | 285mm (11.2”) | |
| D | 222mm (8.7”) | |
| Net weight | 5.3kg (11.7 lbs.) | |
| Others | LEVEL control (+4Db/center click),
EQ: HIGH TRIM switch (+/- 2Db at HF) / ROOM CONTROL Switch (o/-2/-4 Db UNDER 500Hz) |
₦967,395.00 – ₦1,302,262.00
| DSR215 | ||
| General specifications | ||
| Speaker type | Dual 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | |
| Frequency range
(-10dB) |
45Hz ~ 20kHz | |
| Frequency response
(-3dB) |
55Hz ~ 18kHz | |
| Nominal coverage | H | 90° |
| V | 60° | |
| Components | LF | 2 x 15″ cone |
|
HF |
2″ Titanium diaphragm compression driver | |
| Crossover | FIR-X tuning (linear phase FIR filter) | |
| Output power | 1500W (LF: 1020W, HF: 480W) | |
| Maximum output level (1m; on axis) | 138dB SPL | |
| I/O connectors | INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | |
| Processors | D-CONTOUR (Dynamic CONTOUR) | |
| Power consumption | 100W | |
| Dimensions | W | 520mm (20 4/8″) |
| H | 638mm (25 2/8″) | |
| D | 584mm (23″) | |
| Net weight | 49.8kg (110lbs) | |
| Flying and mounting hardware | – | |
| Pole socket | – | |
₦372,000.00
| DBR10 | ||
| General specifications | ||
| Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |
| Frequency range (-10dB) | 55Hz – 20kHz | |
| Nominal coverage | 90°
60° |
|
| Components |
LF |
Diameter:10″ cone, Voice Coil:2″, Magnet:Ferrite |
|
HF |
Diaphragm:1″, Type: 1″ throat compression driver, Magnet:Ferrite | |
| Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |
| Output power | Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W) | |
| Maximum output level (1m; on axis) | 129dB SPL | |
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
| Heat dissipation | Fan cooling, 4 speeds | |
| Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |
| Power consumption | 60W(1/8 Power Consumption), 18W(Idle) | |
| Cabinet material | Plastic | |
| Finish | Black | |
| Handle | Top x 1 | |
| Flying and mounting hardware | Bottom x 2 (Fit for M8 x 15 mm eyebolts) | |
| Pole socket | 35mm (Bottom x 1) | |
|
Dimensions |
W | 308mm (12.1″) |
| H | 493mm (19.4″) | |
| D | 289mm (11.4″) | |
| Net weight | 10.5 kg (23.2 lbs) | |
₦425,600.00 – ₦492,800.00
| MGP32X | MGP24X | MGP16X | MGP12X | |||||
| Outline | ||||||||
| Mixing capability | Mixing channels | 32 Line Inputs (24 mono and 4 stereo) | 24 Line Inputs (16 mono and 4 stereo) | 16 Line Inputs (8 mono and 4 stereo) | 12 Line Inputs (4 mono and 4 stereo) | |||
| GROUP | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | ||||
| AUX | 6 AUX Sends + 2 FX Sends | 6 AUX Sends + 2 FX Sends | 2 AUX Sends + 2 FX Sends | 2 AUX Sends + 2 FX Sends | ||||
| MATRIX | 1 Matrix out | 1 Matrix out | – | – | ||||
| On-board processors | FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) | ||||
| Input channel functions | – | – | Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving | Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving | ||||
₦685,440.00
| C215V | ||
| Size/Weight | ||
| Dimensions | Width | 491mm |
| Height | 1163mm | |
| Depth | 593mm | |
| Weight | Weight | 47.5kg |
| Specifications | ||
| Enclosure | Bass Reflex Type | |
| Speaker unit (LF) | 15″ cone x 2 | |
| Speaker unit (HF) | 2″ V.C.driver | |
| Frequency Response | 42Hz-16kHz | |
| Power Capacity (Noise) | 500W | |
| Power Capacity (Program) | 1000W | |
| Power Capacity (Maximum) | 2000W | |
| Nominal Impedance | 4 ohms | |
| Sensitivity | 99db SPL (1W, 1m) | |
| Nominal Dispersion (Horizontal) | 90° | |
| Nominal Dispersion (Vertical) | 40° | |
| Crossover Frequency | 1.5kHz | |
| Input Connectors | 1/4 ” Phone Jack x 2, Neutrik Speakon NL4MP x 2 | |
| Speaker Units | – | |
| Recommended Crossover | – | |
| DSR215 | DSR115 | DSR112 | DSR118W | ||||||
| General specifications | |||||||||
| Speaker type | Dual 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | 12″ 2-way, Bi-amp Powered Speaker, Bass-reflex Type | 18″ Powered Subwoofer, Bass-reflex Type | |||||
| Frequency range (-10dB) | 45Hz ~ 20kHz | 45Hz ~ 20kHz | 55Hz ~ 20kHz | 40Hz ~ 130Hz | |||||
| Frequency response (-3dB) | 55Hz ~ 18kHz | 55Hz ~ 18kHz | 60Hz ~ 18kHz | 50Hz ~ 110Hz | |||||
| H | 90° | 90° | 90° | ||||||
| V | 60° | 60° | 60° | ||||||
| LF | 2 x 15″ cone | 15″ cone | 12″ cone | 18″ cone | |||||
| HF | 2″ Titanium diaphragm compression driver | 2″ Titanium diaphragm compression driver | 2″ Titanium diaphragm compression driver | ||||||
| FIR-X tuning (linear phase FIR filter) | FIR-X tuning (linear phase FIR filter) | FIR-X tuning (linear phase FIR filter) 1.7kHz | – | ||||||
| 1500W (LF: 1020W, HF: 480W) | 1500W (LF: 1020W, HF: 480W) | 1500W (LF: 1020W, HF: 480W) | 1020W | ||||||
| 138dB SPL | 136dB SPL | 134dB SPL | 132dB SPL | ||||||
| INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | INPUT:XLR-3-31 x1 (Balanced) TRS Phone Jack x1 (Balanced), OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | INPUT: XLR-3-31 x2 (Balanced) OUTPUT: XLR-3-32 x2 (Balanced) Parallel connection with INPUT | ||||||
| CL5 | CL3 | CL1 | QL5 | QL1 | ||
| Mixing Capacity | Input Mixing Channels | 72 mono + 8 stereo | 64 mono + 8 stereo | 48 mono + 8 stereo | 64 mono + 8 stereo | 32 mono + 8 stereo |
| Mix Buses | 24 | 16 | ||||
| Matrices | 8 (Input to Matrix supported) | 8 (Input to Matrix supported) | ||||
| Stereo Bus | 1 | 1 | ||||
| Mono | 1 | 1 | ||||
| Cue | 1 (Second Cue Bus supported in CL V4.0 or later) | 1 (Second Cue Bus supported in QL V4.0 or later) | ||||
| Local Connectors | Analog Inputs | 8 | 32 | 16 | ||
| Analog Outputs | 8 | 16 | 8 | |||
| MY Slots | 3 | 2 | ||||
| Dante I/O | Primary / Secondary | Primary / Secondary | ||||
| Digital Out | 1 (AES/EBU) | 1 (AES/EBU) | ||||
| GPI | 5 in / 5 out (CL V1.11 or later) | 5 in / 5 out | ||||
| Word Clock I/O | Yes | Yes | ||||
| MIDI I/O | In / Out | In / Out | ||||
| External Redundant PSU | Optional PW800W | No | ||||
| Meter Bridge | Output meter built-in | Optional MBCL | No | |||
| Ethernet | Yes | Yes | ||||
| AC Inlet | V-Lock Type | V-Lock Type |
₦967,395.00 – ₦1,302,262.00
| DSR115 | ||
| General specifications | ||
| Speaker type | 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type | |
| Frequency range
(-10dB) |
45Hz ~ 20kHz | |
| Frequency response
(-3dB) |
55Hz ~ 18kHz | |
| Nominal coverage | H | 90° |
| V | 60° | |
| Components | LF | 15″ cone |
|
HF |
2″ Titanium diaphragm compression driver | |
| Crossover | FIR-X tuning (linear phase FIR filter) | |
| Output power | 1500W (LF: 1020W, HF: 480W) | |
| Maximum output level (1m; on axis) | 136dB SPL | |
| I/O connectors | INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT | |
| Processors | D-CONTOUR (Dynamic CONTOUR) | |
| Power consumption | 100W | |
| Dimensions | W | 467mm (18 3/8″) |
| H | 1158mm (45 5/8″) | |
| D | 520mm (20 4/8″) | |
| Net weight | 28.0kg (62lbs) | |
| Flying and mounting hardware | 3 x M10 (TOP L/R 1pc each, Bottom rear 1pc) | |
| Pole socket | 35mm (Bottom Board) | |
| CBR15 | CBR12 | CBR10 | ||
| General specifications | General specifications | General specifications | ||
| Speaker type | 2-way Speaker, Bass-reflex Type | 2-way Speaker, Bass-reflex Type | 2-way Speaker, Bass-reflex Type | |
| Frequency range (-10dB) | 46 Hz – 20 kHz | 48 Hz – 20 kHz | 50 Hz – 20 kHz | |
| Nominal coverage | H | 90° | 90° | 90° |
| V | 60° | 60° | 60° | |
| Components | LF | 15″ Cone, 2.5″ Voice Coil (Ferrite Magnet) | 12″ Cone, 2″ Voice Coil (Ferrite Magnet) | 10″ Cone, 2″ Voice Coil (Ferrite Magnet) |
| HF | 1.4″ Voice Coil, Compression Driver (Ferrite Magnet) | 1.4″ Voice Coil, Compression Driver (Ferrite Magnet) | 1″ Voice Coil, Compression Driver (Ferrite Magnet) | |
| Crossover | 2.0 kHz | 2.1 kHz | 2.8 kHz | |
| Power rating | NOISE | 250W | 175W | 175W |
| PGM | 500W | 350W | 350W | |
| PEAK | 1000W | 700W | 700W | |
| Nominal impedance | 8Ω | 8Ω | 8Ω | |
| SPL | Sensitivity (1W; 1m on axis) | 96dB SPL | 96dB SPL | 94dB SPL |
| Peak (Calculated) | 126 dB SPL | 125 dB SPL | 123 dB SPL | |
| I/O connectors | 1/4″ Phone x 1, speakON NL4MP x 1 | 1/4″ Phone x 1, speakON NL4MP x 1 | 1/4″ Phone x 1, speakON NL4MP x 1 | |
| Cabinet material | Plastic | Plastic | Plastic | |
| Finish | Black | Black | Black | |
| Handle | Side x 2 | Side x 2 | Top x 1 | |
| Flying and mounting hardware | Bottom x 2, Rear x 1 (Fit for M8 x 15mm Eyebolts) | Bottom x 2, Rear x 1 (Fit for M8 x 15mm Eyebolts) | Bottom x 2, Rear x 1 (Fit for M8 x 15mm Eyebolts) | |
| Pole socket | Φ35 mm Bottom x 1 | Φ35 mm Bottom x 1 | Φ35 mm Bottom x 1 | |
| Dimensions | W | 455mm (17.9″) | 376mm (14.8″) | 308mm (12.1″) |
| H | 700mm (27.6″) | 601mm (23.7″) | 493mm (19.4″) | |
| D | 378mm (14.9″) | 348mm (13.7″) | 289mm (11.4″) | |
| Net weight | 17.7 kg (39.0 lbs) | 13.9 kg (30.6 lbs) | 9.4 kg (20.7 lbs) |
₦180,400.00 – ₦225,500.00
| HS8 | ||
| General specifications | ||
| Speaker type | 2-way bi-amp powered studio monitor | |
| Frequency range (-10bB) | 38Hz – 30Hz | |
| Component | LF | 8” cone |
| HF | 1” dome | |
| Crossover | 2kHz | |
| Output power | 120W (LF:75W, HF:45W) | |
| I/O connectors | XLR3-31 type (balanced),
PHONE (balanced) |
|
| Power consumption | 60W | |
| Shape | Base-reflex type | |
| Cabinet material | MDF | |
| Dimensions | W | 250mm (9.8”) |
| H | 390mm (15.4”) | |
| D | 334mm (13.1”) | |
| Net weight | 10.2kg (22.5 lbs.) | |
| Others | LEVEL control (+4Db/center click),
EQ: HIGH TRIM switch (+/- 2Db at HF) / ROOM CONTROL Switch (o/-2/-4 Db UNDER 500Hz) |
Reviews