| |
|
TF5 |
| Outline |
|
|
| Fader Configuration |
32 + 1 (Master) |
24 + 1 (Master) |
| Mixing Capacity |
Input Channels
|
48 (40 mono + 2 stereo + 2 return) |
| Aux Buses
|
20 (8 mono + 6 stereo) |
| Stereo Buses
|
1 |
| Sub Buses |
1 |
| Input channel functions |
8 DCA Groups |
8 DCA Groups |
| I/O |
Inputs
|
32 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
| Outputs
|
16 (XLR) |
| Expansion slots |
1 |
| On-board processors |
DSP |
8 Effects + 10 GEQ |
| USB |
34×34 USB Audio Interface, 2-track recording via USB Storage Device |
34×34 USB Audio Interface, 2-track recording via USB Storage Device |
| General specifications |
|
|
| Sampling frequency rate |
Internal |
48 kHz |
| Signal delay |
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
| Fader |
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
| Total harmonic distortion |
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
| Frequency response |
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
| Dynamic range |
110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
| Hum & noise level |
Equivalent input noise
|
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
| Residual output noise |
–85 dBu, ST master off (Measured with an A-Weight filter) |
| Crosstalk |
–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
| Power requirements |
100–240 V 50/60 Hz |
100–240 V 50/60 Hz |
| Power consumption |
120 W |
110 W |
| Dimensions |
W |
866 mm (34.1in) |
| H |
225 mm (8.9in) |
| D |
599 mm (23.6in) |
| Net weight |
20.0 kg (44.1lb) |
17.0 kg (37.5lb) |
| Accessories |
Quick Guide, Power Cord, CUBASE AI download information |
Quick Guide, Power Cord, CUBASE AI download information |
| Options |
Expansion Card, Foot Switch (FC5) |
Expansion Card, Foot Switch (FC5) |
| Others |
Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
Reviews