0item(s) - ₦0.00
Reco Plaza, Alaba International Market, Lagos   Support@gomacmusicng.com   +2344017740420

DBR

Home  /  Professional Audio  /  Speakers

CBR-10,12,15 ₦0.00
CL Series ₦0.00
Sidebar

DBR

   
General specifications
Speaker type  
Frequency range (-10dB)  
Nominal coverage  
 
Components  
 
Crossover  
Output power  
Maximum output level (1m; on axis)  
I/O connectors  
Processors  
Add to Wishlist
SKU: 11480 Categories: ,
    DBR15 DBR12 DBR10
General specifications
Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type 2-way, Bi-amp powered speaker, Bass-reflex type 2-way, Bi-amp powered speaker, Bass-reflex type
Frequency range (-10dB) 50Hz – 20kHz 52Hz – 20kHz 55Hz – 20kHz
Nominal coverage H 90° 90° 90°
V 60° 60° 60°
Components LF Diameter:15″ cone, Voice Coil:2.5″, Magnet:Ferrite Diameter:12″ cone, Voice Coil:2″, Magnet:Ferrite Diameter:10″ cone, Voice Coil:2″, Magnet:Ferrite
HF Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite Diaphragm:1″, Type: 1″ throat compression driver, Magnet:Ferrite
Crossover   2.1kHz: FIR-X tuning™ (linear phase FIR filter) 2.1kHz: FIR-X tuning™ (linear phase FIR filter) 2.1kHz: FIR-X tuning™ (linear phase FIR filter)
Output power   Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W)
Maximum output level (1m; on axis)   132dB SPL 131dB SPL 129dB SPL
I/O connectors   INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Processors   D-CONTOUR: FOH/MAIN, MONITOR, OFF D-CONTOUR: FOH/MAIN, MONITOR, OFF D-CONTOUR: FOH/MAIN, MONITOR, OFF
Heat dissipation   Fan cooling, 4 speeds Fan cooling, 4 speeds Fan cooling, 4 speeds
Power requirements   100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
Power consumption   74W(1/8 Power Consumption), 18W(Idle) 74W(1/8 Power Consumption), 18W(Idle) 60W(1/8 Power Consumption), 18W(Idle)
Cabinet material   Plastic Plastic Plastic
Finish   Black Black Black
Handle   Side x 2 Side x 2 Top x 1
Flying and mounting hardware   Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) Bottom x 2 (Fit for M8 x 15 mm eyebolts)
Pole socket   35mm (Bottom x 1) 35mm (Bottom x 1) 35mm (Bottom x 1)
Dimensions W 455mm (17.9″) 376mm (14.8″) 308mm (12.1″)
H 700mm (27.6″) 601mm (23.7″) 493mm (19.4″)
D 378mm (14.9″) 348mm (13.7″) 289mm (11.4″)
Net weight   19.3 kg (42.6 lbs) 15.8 kg (34.8 lbs) 10.5 kg (23.2 lbs)

 

Reviews

Be the first to review “DBR”

*

Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products
Add to cart
Add to Wishlist

DBR10

₦372,000.00
DBR10
General specifications
Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type
Frequency range (-10dB) 55Hz – 20kHz
Nominal coverage 90°

60°
Components  

 

LF

 Diameter:10″ cone, Voice Coil:2″, Magnet:Ferrite
 

 

HF

 Diaphragm:1″, Type: 1″ throat compression driver, Magnet:Ferrite
Crossover 2.1kHz: FIR-X tuning™ (linear phase FIR filter)
Output power Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W)
Maximum output level (1m; on axis) 129dB SPL
I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Processors D-CONTOUR: FOH/MAIN, MONITOR, OFF
Heat dissipation Fan cooling, 4 speeds
Power requirements 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
Power consumption 60W(1/8 Power Consumption), 18W(Idle)
Cabinet material Plastic
Finish Black
Handle Top x 1
Flying and mounting hardware Bottom x 2 (Fit for M8 x 15 mm eyebolts)
Pole socket 35mm (Bottom x 1)
 

Dimensions

 W 308mm (12.1″)
H 493mm (19.4″)
D 289mm (11.4″)
Net weight 10.5 kg (23.2 lbs)
Add to cart
Add to Wishlist
Read more
Add to Wishlist

TF Series

    TF5 TF3 TF1
Outline        
Fader Configuration 32 + 1 (Master) 24 + 1 (Master) 16 + 1 (Master)  
Mixing Capacity Input Channels 48 (40 mono + 2 stereo + 2 return) 48 (40 mono + 2 stereo + 2 return) 40 (32 mono + 2 stereo + 2 return)
Aux Buses 20 (8 mono + 6 stereo) 20 (8 mono + 6 stereo) 20 (8 mono + 6 stereo)
Stereo Buses 1 1 1
Sub Buses 1 1 1
Input channel functions 8 DCA Groups 8 DCA Groups 8 DCA Groups  
I/O Inputs 32 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) 24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) 16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
Outputs 16 (XLR) 16 (XLR) 16 (XLR)
Expansion slots 1 1 1
On-board processors DSP 8 Effects + 10 GEQ 8 Effects + 10 GEQ 8 Effects + 10 GEQ
USB 34×34 USB Audio Interface, 2-track recording via USB Storage Device 34×34 USB Audio Interface, 2-track recording via USB Storage Device 34×34 USB Audio Interface, 2-track recording via USB Storage Device  
General specifications        
Sampling frequency rate Internal 48 kHz 48 kHz 48 kHz
Signal delay Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz  
Fader 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders  
Total harmonic distortion Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)  
Read more
Add to Wishlist
Read more
Add to Wishlist

PM Series

RIVAGE PM10
(excluding I/O RACK)
Mixing Capacity Input Mixing Channels   144mono
Mix Buses   72
Matrices   36 (Input to Matrix supported)
Stereo Buses   2
Mono Buses   1
Cue Bus   2
Local Connectors Analog Input XLR 8
Analog Output XLR 8
Expansion Slots HY Slots 4 (DSP-R10)
  MY Slots CS-R10: 2
DSP-R10: 2
Digital In AES/EBU 4
Digital Out AES/EBU 4
GPI IN (D-Sub) 8 (CS-R10) / 8 (DSP-R10)
  Out (D-Sub) 8 (CS-R10) / 8 (DSP-R10)
Word Clock I/O   Only Out (CS-R10)
In / Out (DSP-R10)
MIDI I/O   In / Out (CS-R10)
In / Out (DSP-R10)
USB File 4
  2 Track Rec/Play 1
External Redundant PSU   Built-in dual power supply
Meter Bridge   On screen
Ethernet   Yes
Lamp   4 (CS-R10) / 3 (CS-R10-S)
Talkback In   Yes
Video Out   Yes
TC In   Yes (DSP-R10)
Fault Output   Yes (DSP-R10)
Phones   2
AC Inlet   CS-R10: 2 (V-Lock Type)
DSP-R10: 2 (V-Lock Type)
Read more
Add to Wishlist
Add to cart
Add to Wishlist

MG 124

₦260,000.00
Add to cart
Add to Wishlist
Select options
Add to Wishlist

DSR215

₦967,395.00 – ₦1,302,262.00
  DSR215
General specifications  
Speaker type Dual 15″ 2-way, Bi-amp powered Speaker, Bass-reflex Type
Frequency range

(-10dB)

 45Hz ~ 20kHz
Frequency response

(-3dB)

 55Hz ~ 18kHz
Nominal coverage H 90°
V 60°
Components LF 2 x 15″ cone
 

HF

 2″ Titanium diaphragm compression driver
Crossover   FIR-X tuning (linear phase FIR filter)
Output power   1500W (LF: 1020W, HF: 480W)
Maximum output level (1m; on axis)   138dB SPL
I/O connectors   INPUT: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced) OUTPUT:XLR-3-32 x1 (Balanced), Parallel connection with INPUT
Processors   D-CONTOUR (Dynamic CONTOUR)
Power consumption   100W
Dimensions W 520mm (20 4/8″)
H 638mm (25 2/8″)
D 584mm (23″)
Net weight   49.8kg (110lbs)
Flying and mounting hardware   –
Pole socket   –

 

Select options
Add to Wishlist
Add to cart
Add to Wishlist

MG Braquet

₦260,000.00
Add to cart
Add to Wishlist
Read more
Add to Wishlist

CL Series

  CL5 CL3 CL1 QL5 QL1
Mixing Capacity Input Mixing Channels 72 mono + 8 stereo 64 mono + 8 stereo 48 mono + 8 stereo 64 mono + 8 stereo 32 mono + 8 stereo
Mix Buses 24 16
Matrices 8 (Input to Matrix supported) 8 (Input to Matrix supported)
Stereo Bus 1 1
Mono 1 1
Cue 1 (Second Cue Bus supported in CL V4.0 or later) 1 (Second Cue Bus supported in QL V4.0 or later)
Local Connectors Analog Inputs 8 32 16
Analog Outputs 8 16 8
MY Slots 3 2
Dante I/O Primary / Secondary Primary / Secondary
Digital Out 1 (AES/EBU) 1 (AES/EBU)
GPI 5 in / 5 out (CL V1.11 or later) 5 in / 5 out
Word Clock I/O Yes Yes
MIDI I/O In / Out In / Out
External Redundant PSU Optional PW800W No
Meter Bridge Output meter built-in Optional MBCL No
Ethernet Yes Yes
AC Inlet V-Lock Type V-Lock Type
Read more
Add to Wishlist
Add to cart
Add to Wishlist

MG 102

₦260,000.00
Add to cart
Add to Wishlist
Select options
Add to Wishlist

MGP-MIC 24

₦425,600.00 – ₦492,800.00
  MGP32X MGP24X MGP16X MGP12X      
Outline        
Mixing capability Mixing channels 32 Line Inputs (24 mono and 4 stereo) 24 Line Inputs (16 mono and 4 stereo) 16 Line Inputs (8 mono and 4 stereo) 12 Line Inputs (4 mono and 4 stereo)
GROUP 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus 4 GROUP Buses + ST Bus
AUX 6 AUX Sends + 2 FX Sends 6 AUX Sends + 2 FX Sends 2 AUX Sends + 2 FX Sends 2 AUX Sends + 2 FX Sends
MATRIX 1 Matrix out 1 Matrix out – –
On-board processors FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)
Input channel functions – – Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving
Select options
Add to Wishlist
Select options
Add to Wishlist

TF3

₦784,000.00 – ₦1,232,000.00
    TF3
Outline    
Fader Configuration 32 + 1 (Master) 16 + 1 (Master)
Mixing Capacity Input Channels

 

 

 48 (40 mono + 2 stereo + 2 return)
Aux Buses

 

 20 (8 mono + 6 stereo)
Stereo Buses

 

 1
Sub Buses 1
Input channel functions 8 DCA Groups 8 DCA Groups
I/O Inputs

 

 

 24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
Outputs

 

 16 (XLR)
Expansion slots 1
On-board processors  DSP 8 Effects + 10 GEQ
USB 34×34 USB Audio Interface, 2-track recording via USB Storage Device 34×34 USB Audio Interface, 2-track recording via USB Storage Device
General specifications    
Sampling frequency rate Internal 48 kHz
Signal delay Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders
Total harmonic distortion Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)
Frequency response +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Dynamic range 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Hum & noise level Equivalent input noise

 

 

 –128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)
Residual output noise –85 dBu, ST master off (Measured with an A-Weight filter)
Crosstalk –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Power requirements 100–240 V 50/60 Hz 100–240 V 50/60 Hz
Power consumption 120 W 110 W
Dimensions W 716 mm (28.2in)
H 225 mm (8.9in)
D 599 mm (23.6in)
Net weight 20.0 kg (44.1lb) 13.5 kg (29.8lb)
Accessories Quick Guide, Power Cord, CUBASE AI download information Quick Guide, Power Cord, CUBASE AI download information
Options Expansion Card, Foot Switch (FC5) Rack-mount Kit RK5014, Expansion Card, Foot Switch (FC5)
Others Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C

 

 

Select options
Add to Wishlist
Navigation

MY CART

Close

No products in the cart.

No products in the cart.