DANTE-MY16 – AUD – 16CH. I/O

General Specifications
Audio channels	16IN / 16OUT
Sample rates	44.1kHz, 48kHz, 88.2kHz and 96kHz
Sample rate pull-up/down	+4.1667, +0.1, -0.1, and – 4.0 %
Sample bit-depth	16, 24 or 32-bit PCM
Network	2 x Gigabit (1000Mbps) Ethernet RJ45 connectors
Redundancy	Glitch-free Dante audio redundancy using dual Ethernet networks (redundant mode)
Daisy chaining	Daisy chain multiple Dante-MY16-AUD2 cards together (switched mode)
HA Remote	Support for HA Remote capable Yamaha products
Expandable	Install up to four Dante-MY16-AUD2 cards in available MY16-compatible slots for up to 64×64 audio channels
Compatible Yamaha equipments
Digital Mixers	CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i
Interfaces	RSio64-D
Processors	MRX7-D, MTX5-D, DME24N, DME64N
Power Amps	TX4n, TX5n, TX6n

Add to Wishlist

SKU: 11463 Categories: Mixers, Synthesizers and Music Production

General Specifications
Audio channels	16IN / 16OUT
Sample rates	44.1kHz, 48kHz, 88.2kHz and 96kHz
Sample rate pull-up/down	+4.1667, +0.1, -0.1, and – 4.0 %
Sample bit-depth	16, 24 or 32-bit PCM
Network	2 x Gigabit (1000Mbps) Ethernet RJ45 connectors
Redundancy	Glitch-free Dante audio redundancy using dual Ethernet networks (redundant mode)
Daisy chaining	Daisy chain multiple Dante-MY16-AUD2 cards together (switched mode)
HA Remote	Support for HA Remote capable Yamaha products
Expandable	Install up to four Dante-MY16-AUD2 cards in available MY16-compatible slots for up to 64×64 audio channels
Compatible Yamaha equipments
Digital Mixers	CS-R10, DSP-R10, RPio622, CL5/3/1, QL5/1, PM5D, DSP5D, M7CL, LS9, DM2000, DM1000, 02R96, 01V96, 01V96i
Interfaces	RSio64-D
Processors	MRX7-D, MTX5-D, DME24N, DME64N
Power Amps	TX4n, TX5n, TX6n

Reviews

Be the first to review “DANTE-MY16 - AUD - 16CH. I/O” Cancel reply

Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.

Related Products

Add to Wishlist

TF Series

		TF5	TF3	TF1
Outline
Fader Configuration	32 + 1 (Master)	24 + 1 (Master)	16 + 1 (Master)
Mixing Capacity	Input Channels	48 (40 mono + 2 stereo + 2 return)	48 (40 mono + 2 stereo + 2 return)	40 (32 mono + 2 stereo + 2 return)
	Aux Buses	20 (8 mono + 6 stereo)	20 (8 mono + 6 stereo)	20 (8 mono + 6 stereo)
	Stereo Buses	1	1	1
	Sub Buses	1	1	1
Input channel functions	8 DCA Groups	8 DCA Groups	8 DCA Groups
I/O	Inputs	32 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)	24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)	16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
	Outputs	16 (XLR)	16 (XLR)	16 (XLR)
	Expansion slots	1	1	1
On-board processors	DSP	8 Effects + 10 GEQ	8 Effects + 10 GEQ	8 Effects + 10 GEQ
USB	34×34 USB Audio Interface, 2-track recording via USB Storage Device	34×34 USB Audio Interface, 2-track recording via USB Storage Device	34×34 USB Audio Interface, 2-track recording via USB Storage Device
General specifications
Sampling frequency rate	Internal	48 kHz	48 kHz	48 kHz
Signal delay	Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz	Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz	Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader	100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders	100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders	100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders
Total harmonic distortion	Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)	Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)	Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)

Add to Wishlist

CL Series

		CL5	CL3	CL1	QL5	QL1
Mixing Capacity	Input Mixing Channels	72 mono + 8 stereo	64 mono + 8 stereo	48 mono + 8 stereo	64 mono + 8 stereo	32 mono + 8 stereo
	Mix Buses	24			16
	Matrices	8 (Input to Matrix supported)			8 (Input to Matrix supported)
	Stereo Bus	1			1
	Mono	1			1
	Cue	1 (Second Cue Bus supported in CL V4.0 or later)			1 (Second Cue Bus supported in QL V4.0 or later)
Local Connectors	Analog Inputs	8			32	16
	Analog Outputs	8			16	8
	MY Slots	3			2
	Dante I/O	Primary / Secondary			Primary / Secondary
	Digital Out	1 (AES/EBU)			1 (AES/EBU)
	GPI	5 in / 5 out (CL V1.11 or later)			5 in / 5 out
	Word Clock I/O	Yes			Yes
	MIDI I/O	In / Out			In / Out
	External Redundant PSU	Optional PW800W			No
	Meter Bridge	Output meter built-in			Optional MBCL	No
	Ethernet	Yes			Yes
	AC Inlet	V-Lock Type			V-Lock Type

Add to Wishlist

MGP Series

	MGP32X	MGP24X	MGP16X	MGP12X

Mixing channels	32 Line Inputs (24 mono and 4 stereo)	24 Line Inputs (16 mono and 4 stereo)	16 Line Inputs (8 mono and 4 stereo)	12 Line Inputs (4 mono and 4 stereo)
GROUP	4 GROUP Buses + ST Bus	4 GROUP Buses + ST Bus	4 GROUP Buses + ST Bus	4 GROUP Buses + ST Bus
AUX	6 AUX Sends + 2 FX Sends	6 AUX Sends + 2 FX Sends	2 AUX Sends + 2 FX Sends	2 AUX Sends + 2 FX Sends
MATRIX	1 Matrix out	1 Matrix out	–	–
On-board processors	FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)	FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)	FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)	FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)
Input channel functions	–	–	Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving	Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving
Mic inputs	MIC: 24 (INPUTS HPF: 100Hz 12dB/oct)	MIC: 16 (INPUTS HPF: 100Hz 12dB/oct)	MIC: 10	MIC:6 (100Hz 12dB/oct)
Phantom power	48V phantom power per channel	48V phantom power per channel	48V phantom power per channel	48V phantom power per channel
Line inputs	LINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereo	LINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo	LINE: 8mono+4stereo, CH INSERT: 8, RETURN: 1stereo, 2TR IN: 1 stereo	LINE: 4mono+4stereo, CH INSERT IN: 4, RETURN: 1stereo, 2TR IN: 1 stereo

Add to Wishlist

Select options

Add to Wishlist

TF3

₦784,000.00 – ₦1,232,000.00

		TF3
Outline
Fader Configuration	32 + 1 (Master)	16 + 1 (Master)
Mixing Capacity	Input Channels	48 (40 mono + 2 stereo + 2 return)
	Aux Buses	20 (8 mono + 6 stereo)
	Stereo Buses	1
	Sub Buses	1
Input channel functions	8 DCA Groups	8 DCA Groups
I/O	Inputs	24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
	Outputs	16 (XLR)
	Expansion slots	1
On-board processors	DSP	8 Effects + 10 GEQ
USB	34×34 USB Audio Interface, 2-track recording via USB Storage Device	34×34 USB Audio Interface, 2-track recording via USB Storage Device
General specifications
Sampling frequency rate	Internal	48 kHz
Signal delay	Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz	Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader	100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders	100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders
Total harmonic distortion	Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)	Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)
Frequency response	+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT	+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Dynamic range	110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.	110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Hum & noise level	Equivalent input noise	–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)
Hum & noise level	Residual output noise	–85 dBu, ST master off (Measured with an A-Weight filter)
Crosstalk	–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.	–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Power requirements	100–240 V 50/60 Hz	100–240 V 50/60 Hz
Power consumption	120 W	110 W
Dimensions	W	716 mm (28.2in)
	H	225 mm (8.9in)
	D	599 mm (23.6in)
Net weight	20.0 kg (44.1lb)	13.5 kg (29.8lb)
Accessories	Quick Guide, Power Cord, CUBASE AI download information	Quick Guide, Power Cord, CUBASE AI download information
Options	Expansion Card, Foot Switch (FC5)	Rack-mount Kit RK5014, Expansion Card, Foot Switch (FC5)
Others	Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C	Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C

Select options

Add to Wishlist

Add to cart

Add to Wishlist

MG 124

₦260,000.00

Add to cart

Add to Wishlist

QL Series

		CL5	CL3	CL1	QL5	QL1
Mixing Capacity	Input Mixing Channels	72 mono + 8 stereo	64 mono + 8 stereo	48 mono + 8 stereo	64 mono + 8 stereo	32 mono + 8 stereo
	Mix Buses	24			16
	Matrices	8 (Input to Matrix supported)			8 (Input to Matrix supported)
	Stereo Bus	1			1
	Mono	1			1
	Cue	1 (Second Cue Bus supported in CL V4.0 or later)			1 (Second Cue Bus supported in QL V4.0 or later)
Local Connectors	Analog Inputs	8			32	16
	Analog Outputs	8			16	8
	MY Slots	3			2
	Dante I/O	Primary / Secondary			Primary / Secondary
	Digital Out	1 (AES/EBU)			1 (AES/EBU)
	GPI	5 in / 5 out (CL V1.11 or later)			5 in / 5 out
	Word Clock I/O	Yes			Yes
	MIDI I/O	In / Out			In / Out
	External Redundant PSU	Optional PW800W			No
	Meter Bridge	Output meter built-in			Optional MBCL	No
	Ethernet	Yes			Yes
	AC Inlet	V-Lock Type			V-Lock Type
Scene Memory	Number of Scenes	300			300
	Recall Safe	Yes			Yes
	Focus Recall	Yes			Yes
	Fade Time	Yes (0s ~ 60s)			Yes (0s ~ 60s)
	Preview	Yes (CL V1.51 or later)			Yes
	Selective Load / Save	Yes (CL V1.7 or later)			Yes
	Tactile Control Keys	Yes			No (on-screen)
Input Channel Functions	Gain Compensation	Yes			Yes
	Digital Gain	Yes (-96dB ~ +24dB)			Yes (-96dB ~ +24dB)
	ATT	-96dB ~ 0dB			-96dB ~ 0dB
	HPF	20Hz ~ 600Hz, -6 or -12dB/oct Selectable (CL V1.51 or later)			20Hz ~ 600Hz, -6 or -12dB/oct Selectable

Add to Wishlist

Sold out

Select options

Add to Wishlist

MODX

₦784,000.00

General Specifications		MODX8	MODX7
Size/Weight
Dimensions	Width	1,333mm (52-1/2″)	1,144mm (45-1/16″)
	Height	160mm (6-1/16″)	134mm (5-1/4″)
	Depth	404mm (15-7/8″)	331mm (13-1/16″)
Weight	Weight	13.8 kg (30 lbs 7 oz)	7.4 kg (16 lbs 5 oz)
Control Interface
Keyboard	Number of Keys	88	76
	Type	GHS Keyboard	Semi-weighted Keyboard
	Initial Touch	Yes	Yes
	Aftertouch	No	No
Tone generator
Tone Generator		Motion Control Synthesis Engine AMW2: 8 Elements FM-X: 8 Operators, 88 Algorithms	Motion Control Synthesis Engine AMW2: 8 Elements FM-X: 8 Operators, 88 Algorithms
Maximum Polyphony		AWM2: 128 (max.; stereo/mono waveforms) FM-X: 64 (max.)	AWM2: 128 (max.; stereo/mono waveforms) FM-X: 64 (max.)
Multi Timbral Capacity		16 Parts (internal), Audio Input Parts (A/D, USB) *stereo Part	16 Parts (internal), Audio Input Parts (A/D, USB) *stereo Part
Wave		Preset: 5.67 GB (when converted to 16 bit linear format), User: 1.00 GB	Preset: 5.67 GB (when converted to 16 bit linear format), User: 1.00 GB
Performance		Approx. 2,000	Approx. 2,000

Select options

Add to Wishlist

Select options

Add to Wishlist

MGP-MIC 24

₦425,600.00 – ₦492,800.00

		MGP32X	MGP24X	MGP16X	MGP12X
Outline
Mixing capability	Mixing channels	32 Line Inputs (24 mono and 4 stereo)	24 Line Inputs (16 mono and 4 stereo)	16 Line Inputs (8 mono and 4 stereo)	12 Line Inputs (4 mono and 4 stereo)
	GROUP	4 GROUP Buses + ST Bus	4 GROUP Buses + ST Bus	4 GROUP Buses + ST Bus	4 GROUP Buses + ST Bus
	AUX	6 AUX Sends + 2 FX Sends	6 AUX Sends + 2 FX Sends	2 AUX Sends + 2 FX Sends	2 AUX Sends + 2 FX Sends
	MATRIX	1 Matrix out	1 Matrix out	–	–
	On-board processors	FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)	FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control)	FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)	FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control)
	Input channel functions	–	–	Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving	Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving

Select options

Add to Wishlist

PM Series

			RIVAGE PM10 (excluding I/O RACK)
Mixing Capacity	Input Mixing Channels		144mono
	Mix Buses		72
	Matrices		36 (Input to Matrix supported)
	Stereo Buses		2
	Mono Buses		1
	Cue Bus		2
Local Connectors	Analog Input	XLR	8
	Analog Output	XLR	8
	Expansion Slots	HY Slots	4 (DSP-R10)
		MY Slots	CS-R10: 2 DSP-R10: 2
	Digital In	AES/EBU	4
	Digital Out	AES/EBU	4
	GPI	IN (D-Sub)	8 (CS-R10) / 8 (DSP-R10)
		Out (D-Sub)	8 (CS-R10) / 8 (DSP-R10)
	Word Clock I/O		Only Out (CS-R10) In / Out (DSP-R10)
	MIDI I/O		In / Out (CS-R10) In / Out (DSP-R10)
	USB	File	4
		2 Track Rec/Play	1
	External Redundant PSU		Built-in dual power supply
	Meter Bridge		On screen
	Ethernet		Yes
	Lamp		4 (CS-R10) / 3 (CS-R10-S)
	Talkback In		Yes
	Video Out		Yes
	TC In		Yes (DSP-R10)
	Fault Output		Yes (DSP-R10)
	Phones		2
	AC Inlet		CS-R10: 2 (V-Lock Type) DSP-R10: 2 (V-Lock Type)

Add to Wishlist

Sold out

Select options

Add to Wishlist

Montage

₦1,288,000.00 – ₦1,456,000.00

General Specifications		MONTAGE8	MONTAGE7	MONTAGE6
Size/Weight
Dimensions	Width	1,450mm (57-1/16″)	1,244 mm (49″)	1,037 mm (40-13/16″)
	Height	170mm (6-11/16″)	131 mm (5-3/16″)	131 mm (5-3/16″)
	Depth	460mm (18-1/8″)	396 mm (15-9/16″)	396 mm (15-9/16″)
Weight	Weight	29 kg (63 lbs., 15 oz.)	17 kg (37 lbs., 8 oz.)	15 kg (33 lbs., 1 oz.)
Control Interface
Keyboard	Number of Keys	88	76	61
	Type	Balanced Hammer Effect Keyboard	FSX Keyboard	FSX Keyboard
	Initial Touch	Yes	Yes	Yes
	Aftertouch	Yes	Yes	Yes

Select options

Add to Wishlist

DANTE-MY16 – AUD – 16CH. I/O

Description

Reviews (0)

Add Tags

Reviews

Be the first to review “DANTE-MY16 - AUD - 16CH. I/O” Cancel reply

+2344017740420

WORKING TIME

FREE SHIPPING

MONEY BACK

Product Categories

Navigation

MY CART